Cold milling machine W 35 DC
24Pages

The small all-rounder with a wealth of applications Cold Milling Machine W 35 DC

The ideal candidate for a wide range of applications The W 35 DC is second to none in the 35-cm class The manoeuvrable W 35 DC proves to be an exceedingly helpful ally on the milling site, for its special hallmark – its small dimensions – makes it the ideal candidate for all those minor but important tasks. And that’s not all: Useful options, such as loading conveyor, all-wheel drive or 50 cm wide milling drum unit, open up an immense range of applications to the W 35 DC. Milling small areas for partial repairs, milling passes, supporting the large milling machines, and a whole lot more...

The compact small milling machine excels in manoeuvrability, versatility and ergonomic design Successful milling, even where things get tight The standard model of the W 35 DC is not equipped with a loading conveyor Individual options, such as loading conveyor, all-wheel drive or FCS, greatly extend the machine’s range of applications. The machine’s speedy operation and convenient size for transport enable it to work on several job sites on a single day, depending on the distance. The compact cold milling machine W 35 DC is perfectly tailored to smaller construction projects. 2 // 3

Small milling machine – big performance Milling surfaces is part of the repertoire It is really quite astonishing, just how much the innovative cold milling machine W 35 DC can achieve, in spite – or perhaps because – of its small dimensions. In addition to the many minor tasks that the industrious machine pulls off so well, it certainly also has a say in the economical milling of surfaces. This is down to the 50 cm wide optional milling drum. The approximate practical area performance to be expected can be calculated by subtracting an allowance factor from the idealized performance curve....

Milling depth (cm) 11 Hard asphalt 10 9 Soft asphalt 8 7 Most frequent operating area 6 5 4 3 2 1 0 0 50 100 150 200 250 300 350 True performance shows in practical operation Theoretical area performance (m2/h) 400 Free motorway section (allowance factor: 0.7) 0 50 100 150 200 250 300 Practical area performance (m2/h) Country road with road fixtures (allowance factor: 0.5) 0 50 100 150 200 Practical area performance (m2/h) Milling in flowing traffic Heavily trafficked inner-city road (allowance factor: 0.3) 0 50 100 The final area performance can be calculated using an allowance factor that...

Top-of-the-range milling Tried-and-tested components A central item in the requirement specifications of Wirtgen’s design engineers – and a standard feature in all Wirtgen cold milling machines – is a state-of-the-art, high-tech milling drum unit. The W 35 DC is no exception to this rule, because the advantages offered by such a unit are obvious: The hydraulically pressurized scraper ensures a clean milled track and secure intake of the granulated material, and the edge protectors reliably seal off the drum housing. It is really not surprising, therefore, that with these features successful...

The scraper can be moved up and down hydraulically For optimum milling results The edge protectors glide on the asphalt surface The machine can be converted to a milling width of 50 cm for larger milling jobs The machine’s ingenious design permits the flexible use of different milling drums for different applications. The optional loading conveyor can be retrofitted at any time for both the 35 cm and the 50 cm wide milling drum. The machine’s standard milling width of 35 cm can optionally be extended to 50 cm. 6 // 7

Milling drums with a clear-cut profile A selection from the comprehensive range of milling drums: Milling drum Milling width: Milling depth: Tool spacing: Micro fine milling drum Micro fine milling drum Milling drum Milling width: Milling depth: Tool spacing: Fine milling drum Milling width: Milling depth: Tool spacing: Micro fine milling drum Cutting technology is our core competence ture cutting technology which has proven its worth time and again in everyday use. Milling drums are replaced quickly and easily, which enables different working widths and tool spacings to be used for...

Work on the wearing parts made easy Cutting tools per cubic metre 3.0 2.5 2.0 1.5 1.0 0.5 0.0 25 50 75 100 125 150 175 200 Milling depth in mm Cutting tools per m3 at high wear and tear Cutting tools per m3 at low wear and tear 3 Cutting tools per m at medium wear and tear Cutting tool wear as a function of the milling depth and the properties of the pavement to be milled The water spray system for cooling the cutting tools provides easy access Low cutting tool wear cuts operating costs Replacing the cutting tools in a comfortable body posture The engine is automatically switched off when...

The loading conveyor – an exceptionally useful option Retrofitting the loading conveyor converts the W 35 DC into a multi-functional rear loader The scraper door with loading conveyor is opened in a few swift moves Direct loading boosts performance Anyone who knows what a strenuous and time-consuming job it is to remove the milled material from the milled track by hand will soon come to appreciate the optional loading conveyor of the W 35 DC. It conveys the granulated material effectively and safely to, for instance, the bucket of a wheel loader. This dispenses with the uneco- nomical...

The loading conveyor is connected to the machine via quick-release hydraulic couplings Economical milling made easy Variable discharge height for safe loading into the bucket of a wheel loader or mini dumper Slewing the conveyor to the left or right The loading conveyor can be mounted or removed by a single person in next to no time. The loading conveyor can be retrofitted, provided that the machine is equipped with the optional hydraulic and mechanical fittings. The hydraulic power take-off can alternatively be used for ancillary devices, such as the high-pressure cleaner or hydraulic...