CONCURRENT DUAL BAND CLIENT ANTENNA WiBOX SA M4DBC245-65-9X WiBOX SA M4DBC245-65-9X is dual band concurrent (DBC) (2,4 and 5 GHz) X (slant) polarity MIMO 4x4 panel antenna. It can operate at two frequencies simulteneously, at 2.4 GHz and at 5 GHz. According to medium gain, it can be used on short and medium distances, for example for hotspots in schools, stadiums, offices or some public places. Can work also with mobile devices. It can work indoor and outdoor (IP67) as well. Wide frequency band (2.4-2.5 GHz & 4.9-6.0 GHz) allows to easily find suitable frequency for the operation. The antenna comes with No. 4 RP SMA plug connectors (it could be also with RP TNC, MMCX or u.FL conectors), and it’s designed for work in concurrent dual band technology, which means that SA M4DBC245-65-9X radiates simultaneously at both operating frequencies using only one single connector for 2.4 and 5 GHz signal. It’s predicted for special Access Points working in the systems where two bands (frequencies) are diplexed in one antenna connector, from the companies as Cisco, Aruba Networks, Huawei, Xirrus and others. The antenna is integrated with the top quality WiBOX Medium box system. Electrical specification Frequency Gain VSWR Beamwidth Polarization Cross-Polar Isolation Front-to-Back Separation between Connectors Impedance Max Input Power Lighting Protection DC Ground Dimensions Weight Connector Material Waterproof level Operating temperature Regulation Range Weight Mast Dimensions Range Material Gain for the frequency of 4900 - 6000 MHz 4x 9 dBi Polarization X for the frequency of 4900 6000 MHz 4 x Connector SMA Big, ergonomic and voluminous WiBOX Medium enclosure for radio equipment instalation Outdoor Waterproof Enclosure WiBOX Medium Designed and resistant for any weather conditions Applications Client Antennas System Integration Point-to-point connections Point-to-Multipoint Connections Hotspot RJ45 Waterproof System Grounding system protecting against lighting - DC Ground Mechanic specification 9.9 x 10.5 x 14.8 cm 3.9 x 4.13 x 5.83 inch +/- 30° 0.87 kg 250 - 650mm Poliamid with fiberglass + galvanized steel