HB12 ROTARY DRAW HAND BENDER Shown with optional plug mandrel support The HB12 is a hand bender designed to make precision bends in a single work piece. The base unit can be mounted in a vise or attached to a bench. The HB12 comes standard with an adjustable bend angle stop that includes an angular scale. Over center toggles ensure that both the pressure die and clamp die remain in position while a bend is being made. Options include a plug mandrel attachment, pre-bend stop assembly to clock up to 4 bends in a single work piece, and interchangeable dies. The HB12 is capable of bending stainless steel tubing or semi-rigid coax cable. Its ability to quickly change from one die set to the next makes this hand bender versatile. Specifications Corporate Office/Factory 300 Shawnee North Drive Suite 100 Suwanee, GA 30024 Ph: +1-888-321-1499 or 770-831-1917 Fax 770-831-6459 www.wintonmachine.com email: [email protected] 5/17/19

HB12 ROTARY DRAW HAND BENDER • Capacity: 0.500” OD X .049” wall copper (3/8” mild steel) on a 2D radius • Maximum centerline radius: 2” • Weight: 10 lbs. • Bend angle repeatability: ± .25° • Standard bending process: rotary draw. Wipe bending is available upon request Over center toggles on clamp and static pressure die Mounting: vise or bench Base Unit and Available bend die sets Corporate Office/Factory 300 Shawnee North Drive Suite 100 Suwanee, GA 30024 Ph: +1-888-321-1499 or 770.831.1917 Fax 770.831.6459 www.wintonmachine.com email: [email protected]

HB12 ROTARY DRAW HAND BENDER Corporate Office/Factory 300 Shawnee North Drive Suite 100 Suwanee, GA 30024 Ph: +1-888-321-1499 or 770.831.1917 Fax 770.831.6459 www.wintonmachine.com email: [email protected]