1. Catalogs
  2. WINTERS INSTRUMENTS
  3. LIS Intrinsically Safe Transmitter

LIS Intrinsically Safe Transmitter
1 /2Pages

LIS Intrinsically Safe Transmitter

LIS Intrinsically Safe Transmitter
1 /2Pages

Catalog excerpts

LIS Intrinsically Safe Transmitter-1

Intrinsically Safe Transmitter Description & Features: • • • • • • • • • Approved for intrinsically-safe applications in Class 1/Div. 1 hazardous areas Rugged stainless steel construction with ceramic sensor Available ranges include in/Hg up to 8,700 psi Wide range of mechanical and electrical connections ±0.25% accuracy NEMA 4X and 6P / IP65, IP67 and IP68 Approved for outdoor use Customizable 1 year warranty Appropriate for all hazardous areas where an intrinsically safe rating is required, including oil & gas and chemical installations Output Signal Standard 2-wire: 4-20 mA / Vs = 12-36 Vdc Ex-protection: Vs = 14-28 Vdc Optional 3-wire: 0-20 mA / Vs = 14-36 Vdc 0-10 V / Vs = 14-36 Vdc Permissible Load Current 2-wire: Rmax = [(Vs - Vs min) / 0.02] Ohm Current 3-wire: Rmax = 500 Ohm Voltage 3-wire: Rmin = 10 kOhm Influence Effects Supply: 0.05% FSO / 10 V Load: 0.05% FSO / kOhm Response Time Current Consumption Operation Life Connecting Cables Cable capacitance: Signal line/shield and signal line/signal line: 160 pF/m Cable inductance: Signal line/shield and signal line/signal line: 1 µH/m Thermal Error Order Codes Reverse Polarity Protection Medium: -40°F to 275°F (-40°C to 135°C) Electronics environment: -40°F to 185°F (-40°C to 85°C) Permissible Temperatures Ex-protection Zone 0: -4°F to 140°F (-20°C to 60°C) Ex-protection Zone 1/higher: -13°F to 158°F (-25°C to 70°C) Storage: -40°F to 212°F (-40°C to 100°C) Short-circuit Protection Permanent No damage. No function. Electromagnetic Protection Emission and immunity according to EN 61326 SS pressure port: Zone 01: II 1 G Ex ia IIC T4 Zone 20: II 1 D Ex tD A20 IP65 T 85°C Safety technical max values: Vi = 28 V, I = 93 mA, Pi = 660 mW, Ci < 1nF, L < 10 µH Pollution Degree 4, electrical equipment for outdoor use Pressure Port Wetted Parts Seals: PN < 1450 psi: FKM (Viton® standard, Kalrez® optional). PN > 1450 psi: NBR (Buna N). Others available. Diaphragm: Ceramic AI2O3 96% Note: Intrinsically safe approval only applies to 4-20 mA output signal Kalrez® is a registered trademark of DuPont Performance Elastomers Viton® is a registered trademark of DuPont Performance Elastomers 1 Approved for atmospheric pressure from 12 up to 16 psi WINTERS INSTRUMENTS

 Open the catalog to page 1
LIS Intrinsically Safe Transmitter-2

Intrinsically Safe Transmitter Mechanical Connection Electrical Connection (up to 363 psi; nominal pressure abs. on request! 5 Different cable types/lengths 6 Standard: 2m PVC cable without ventilation tube. Optional: Cable with ventilation tube psi, cable with ventilation tube Wiring Diagram 1/2" NPTF conduit fitting WINTERS INSTRUMENTS

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.