*mydirectindustry

PS-ATX150

Product catalog summary

Features

Universal AC input range from 90 to 264VAC.
Input frequency between 47 to 63Hz.
Provides five ATX-compatible DC output voltages: +3.3V, +5V, +5VSB, +12V, and -12V.
Supports Power Good, Power On, and Push Button signals.
Convection cooling, no fan required.
Includes short circuit, over temperature, and overvoltage protection.
Active Power Factor Correction (PFC) compliant with IEC61000-3-2 and IEC 61000-3-3.
Approved by IEC 60950-1, UL60950-1, and EN 606950-1.
MTBF greater than 130,000 hours at 50°C.
Operating temperature range from -10° to +70°C.
Dimensions: 198 x 97 x 40.5mm.

Product Description

The WinSystems PS-ATX150-0 is a 150W power supply designed for ATX-compatible Single Board Computers (SBCs). It accepts a universal AC input and provides five different output voltages. The power supply supports ATX signals and operates efficiently within a temperature range of -10° to +50°C at full capacity, with a derating of 2.5% per degree above 50°C up to 70°C.

The unit complies with various safety and EMC standards, including UL60950-1, IEC 60950-1, and TUV EN60950-1:2001. It meets EMI standards EN55022 (CISPR22) Class B and FCC Part 15, and is compliant with EN61000-4 series standards. The PFC circuit adheres to EN61000-3-2 and EN 610003-3 Class D standards.

Ordering Information

PS-ATX150-0: 150W ATX power supply without cables.
PS-ATX150-ATX: 150W ATX power supply with AC power cord and DC cable harness.

Technical Support

WinSystems offers free technical support to assist with design and production. For inquiries or custom configurations, contact via telephone at (817) 274-7553 or email [email protected].

Catalog excerpts

\^ An Employee -0 wnsd Company • Input frequency from 47 to 63Hz • Five ATX-compatible DC output voltages: +3.3V, +5V, • Power Good, Power On, and Push Button supported • No fan required, convection cooling • Short circuit protection • Over temperature and overvoltage protection Product Description WinSystems' PS-ATX150-0 is a 150W, convection-cooled, power supply for ATX-compatible Single Board Computers (SBCs). It is a universal design that accepts 90 to 264VAC input and generates five different output voltages as well as supporting the ATX signals of Power Good, Power On, and Push Button. The unit operates from -10° to +50°C at 100% for a total out- put capacity of 150W. Starting at +50°C, its output power derates linearly at a 2.5% per degree rate up to a maximum The unit meets various safety and EMC standards. It is UL60950- conduction, and radiation, it is compliant to EN55022 (CISPR22) Class Band FCC Part 15. It also is compliant with EN61000-4- meets EN61000-3-2 and EN 610003-3 Class D standards. There are two different ordering options: one with and one without a DC power harness for WinSystems'SBCs. WinSystems | 715 Stadium Drive, Arlington, TX 76011 USA

Open the catalog to page 1

PS-ATC150-0: 150W ATX Power Supply Ordering Information PS-ATX150-0 PS-ATX150-ATX 150W ATX power supply without cables 150W ATX power supply with two cables: CBL-PWR-202-96 8-ft., AC power cord CBL-PWR-A02-16 16-in., DC cable harness Technical Support and Custom Configurations WinSystems offers free support to speed your initial design cycle into production. Our Applications Engineers are dedicated to answering your questions. If you do not see a product or feature listed in our literature that you require, please contact us, telephone (817) 274-7553 or email [email protected]. WinSystems reserves...

Open the catalog to page 2

PS-ATX150

PS-ATX150

Catalog excerpts

All WinSystems, Inc. catalogs and technical brochures