PS-ATX-150-0 150W ATX Power Supply for Industrial SBCs Features • Universal AC input: 90 to 264VAC • Input frequency from 47 to 63Hz • Five ATX-compatible DC output voltages: +3.3V, +5V, +5Vsb , +12V, and -12V • Power Good, Power On, and Push Button supported • No fan required, convection cooling • Short circuit protection • Over temperature and overvoltage protection • Active PFC meets IEC61000-3-2 and IEC 61000-3-3 • IEC 60950-1, UL60950-1, and EN 606950-1 approved • MTBF >130,000 hours @ 50°C • Operating temperature: -10° to +70°C • Size: 198 x 97 x 40.5mm Product Description WinSystems' PS-ATX150-0 is a 150W, convection-cooled, power supply for ATX-compatible Single Board Computers (SBCs). It is a universal design that accepts 90 to 264VAC input and generates five different output voltages as well as supporting the ATX signals of Power Good, Power On, and Push Button. The unit operates from -10° to +50°C at 100% for a total output capacity of 150W. Starting at +50°C, its output power derates linearly at a 2.5% per degree rate up to a maximum temperature of +70°C for a 75W capacity. The unit meets various safety and EMC standards. It is UL60950-1, IEC 60950-1, and TUV EN60950-1:2001 approved. For EMI, conduction, and radiation, it is compliant to EN55022 (CISPR22) Class B and FCC Part 15. It also is compliant with EN61000-4-2, -3, -4, -5, -6, -8, -11. Its power factor correction (PFC) circuit meets EN61000-3-2 and EN 610003-3 Class D standards. There are two different ordering options: one with and one without a DC power harness for WinSystems' SBCs. WinSystems | 715 Stadium Drive, Arlington, TX 76011 USA | Tel 817-274-7553 | [email protected] | www.WinSyst

PS-ATC150-0: 150W ATX Power Supply Ordering Information PS-ATX150-0 PS-ATX150-ATX 150W ATX power supply without cables 150W ATX power supply with two cables: CBL-PWR-202-96 8-ft., AC power cord CBL-PWR-A02-16 16-in., DC cable harness Technical Support and Custom Configurations WinSystems offers free support to speed your initial design cycle into production. Our Applications Engineers are dedicated to answering your questions. If you do not see a product or feature listed in our literature that you require, please contact us, telephone (817) 274-7553 or email [email protected]. WinSystems reserves...