RAPTOR - Hydraulic cutter heads for excavators

Product catalog summary

Overview: The document provides technical specifications for the Raptor series of hydraulic cutters designed for use with excavators. These cutters are known for their high cutting torque and are available in seven models suitable for excavators ranging from 2 to 60 tons. The cutters come in three drum versions: rock/demolition, excavation, and scaling.

Key Features:

High cutting torque and low maintenance requirements.
Heavy-duty drums with thick walls and robust bearings.
Low vibration and noise levels, suitable for underwater usage.

Technical Specifications:

Models: Raptor WF 05, WF 20, WF 25, WF 30, WF 35, WF 55, WF 60.
Power range: 18 kW to 140 kW.
Operating pressure: Up to 375 bar.
Flow rate: 40 - 600 l/min depending on the model.
Cutter head torque: Up to 44,500 Nm.
Drum types: Rock/Demolition, Scaling, Excavation.
Cutting width and diameter vary by model and drum type.
Number of picks and pick force are specified for each model.

Hydraulic Requirements:

One high-pressure line, one return line, and one drainage line are required.

Usage Notes:

Do not use the provided hydraulic data for excavator adjustment; refer to the manual for detailed instructions.

Contact Information: WIMMER Hartstahl GmbH & Co. KG and its international branches provide contact details for further inquiries.

Catalog excerpts

RAPTOR - Hydraulic cutter heads for excavators-1

Hydraulic cutters Raptor Universal cutter head for hydraulic excavators High cutting torque 7 models for excavators from 2 to 60 tons 3 drum versions available: rock / demolition, excavation, scaling Thick walled heavy duty drums Low maintenance, heavy duty bearings Low vibration and low noise For underwater usage (see manual) Quality without Compromise.

Open the catalog to page 1

RAPTOR - Hydraulic cutter heads for excavators-2

Technical details ATTENTION: Do not use this hydraulic data for excavator adjustment !! Please use the manual Raptor WF 05 Power ** Max. operating pressue ** Flow rate ** Cutter head torque (@300 bar) Drum Cutting width Cutting Ø Number of picks Pick force Cutting speed Operating weight (without adapter) Excavator weight ** see power curve Power ** Max. operating pressue ** Flow rate ** Cutter head torque (@300 bar) Drum Cutting width Cutting Ø Number of picks Pick force Cutting speed Operating weight (without adapter) Excavator weight ** see power curve Required hydraulics: 1 x high pressure...

Open the catalog to page 2