Wall Panel Lifting Gear
2Pages

{{requestButtons}}

Catalog excerpts

Wall Panel Lifting Gear - 1

330 WALL PANEL LIFTING GEAR The galvanized wall panel lifting gear is used for the laying of horizontally positioned AAC wall panels. The profiled clamps ensure a high grip. If the safety chain is applied a transport high above the ground is permitted. The safety chain can be released by a tension rope of 10 m length. Carrying Capacity kg 346 JUMBO BLOCK PINCER The jumbo block pincer is used for the laying of AAC jumbo stones. The steel teeth of the clamps enable a high grip. The working width can be adjusted using the bolt supplied. Cream-coloured varnish, RAL 9001.

Open the catalog to page 1
Wall Panel Lifting Gear - 2

350 FLOOR PANEL LIFTING GEAR Floor panel lifting gear with safety chain. This lifting gear is used for the laying of reinforced floor and roof panels with profiled sides. The panels can be laid by one person without any space left in between. Adjustment of the panels is not necessary. The floor panel lifting gear is delivered with a chain storage and 2 galvanized safety chains which can be continuously fitted. The chains are fixed and as a result cannot be lost. If the safety chains is applied a transport high above the ground is permitted. Carrying Capacity kg * L = Construction length /...

Open the catalog to page 2

All WIMAG GmbH catalogs and technical brochures

  1. Uni-Levator

    2 Pages

  2. Beta-Levator

    2 Pages

  3. Frame Crane

    2 Pages

  4. Gantry Crane

    2 Pages

  5. Lifting Beam

    4 Pages

  6. Stone Lifter

    1 Pages

  7. Stone Clamp

    1 Pages

  8. Boulder Grab

    2 Pages

  9. Flat Grab

    4 Pages

  10. Screw Clamp

    1 Pages

  11. Block Clamp

    1 Pages

  12. Flat Clamp

    1 Pages

  13. Hydro Grab

    2 Pages

  14. Round Clamp

    1 Pages

  15. Round Grab

    2 Pages

  16. Pipe Layer

    2 Pages

  17. Pipe Puller

    4 Pages

  18. Pipe Grab

    1 Pages

  19. Rope Winch

    4 Pages