1. Catalogs
  2. WIMAG GmbH
  3. Sheet Pile Clamp

Sheet Pile Clamp

Sheet Pile Clamp

Product catalog summary
Specifications:
  • Models and Capacities: The document lists three models of sheet pile clamps with varying pulling forces and specifications: LZ-1.0 with a pulling force of 1,000 kg, DZ-3.0 with 3,000 kg, and DZ-4.0 with 4,000 kg.
  • Opening Width and Bolt Diameter: The opening widths range from 10 mm to 40 mm, and bolt diameters range from 16 mm to 35 mm.
  • Weight: The weights of the clamps vary from 4 kg to 24 kg.
Procedures:
  • Operation: The clamp opens when the pull rope is engaged. Pulling the rope to one side causes the bolt to snap into the hole, securing the clamp.
  • Components: Each clamp is delivered with a suspension eye, chain, shackle, and a 6-meter rope.
Recommendations:
  • Special Designs: Special designs are available upon request, indicating customization options for specific needs.
Additional Information:
  • The document is subject to alterations as of March 2022, and further details can be found on the manufacturer's website.
See more

Catalog excerpts

Sheet Pile Clamp-1

123 SHEET PILE CLAMP Pull rope: clamp opens. Pull rope: clamp opens. Pull rope to one side: bolt snaps in the hole. For safe transport of sheet piles Opening and locking with the rope Delivered with suspension eye, chain, shackle and 6 m rope Opening Width Subject to alteration I 03.2022 I Special designs on request Pulling Force

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.