Catalog excerpts
Automatic load-pressure brake Solid and galvanized housing Closed gear Subject to alteration I 01.2000
Open the catalog to page 1
Specification The Winch SW 100 is characterised by a simple design. It is corrosion-proof galvanized, easy to run and can be used for all purposes. Solid construction via closed housing. The SW 100 is equipped with an automatic axial load-pressure brake with safety catch which holds the load securely and safely in any position. The gear is completely encapsulated. The bearing is equipped with plain bearings requiring no maintenance. The crank is equippped with a turnable handle. The crank arm is continuously adjustable in length and can be removed in an unloaded condition. The winch can be...
Open the catalog to page 2
The winches are equipped with a direct drum drive for rapid winding/unwinding of the unloaded rope. The winch can be simply fixed to a console or to the floor. The unwinding of the rope is possible in four directions. The winches are constructed in accordance with the Regulations for the Prevention of Accidents, BGV D8. Delivered unit Winch with crank. Supplied without fixing material or rope. Order No. Pulling Force Pulling Force 1st Layer Top Layer Manual Rope Force Ø Crank Radius Average Stroke/ Weight Rotation Accessories and wire ropes on request.
Open the catalog to page 3
206 MOTOR FOR MANUAL WINCH Worm drive to be fixed to WIMAG rope winches Safety clutch operated by torque Construction in accordance with the Regulations for the Prevention of Accidents Use motorised crank and not the manual crank and place it on the square spigot of the rope winch. It guarantees easy operation without force for large lifting heights. The crank motor is equipped with a deadmans control as standard, guaranteeing maximum safety during lifting operation. Rotary Current Alternating Current Voltage Frequency Motor Power Volt Hz kW Amp Operating Time % ED Motor Speed approx. min1...
Open the catalog to page 4All WIMAG GmbH catalogs and technical brochures
-
WiMAG Complete Range15 Pages
-
Kappa-Levator4 Pages
-
Uni-Levator2 Pages
-
Gamma-Levator2 Pages
-
Turbo H-Levator4 Pages
-
Turbo M-Levator4 Pages
-
Beta H-Levator2 Pages
-
Beta-Levator2 Pages
-
Alpha-Levator2 Pages
-
Aluminium Travelling Crane2 Pages
-
Travelling Crane2 Pages
-
Mobile Aluminium Crane4 Pages
-
Aluminium Gantry Crane2 Pages
-
Mobile Aluminium Fourleg2 Pages
-
Aluminium Fourleg2 Pages
-
Aluminum jib crane2 Pages
-
Alu-Ruck-Zuck2 Pages
-
Frame Crane2 Pages
-
Gantry Crane2 Pages
-
Pallet Lifter2 Pages
-
Load Rotating Beam4 Pages
-
Aluminium Lifting Beam2 Pages
-
Lifting Beam4 Pages
-
Hollow Block Clamp1 Pages
-
Stone Lifter1 Pages
-
Stone Clamp1 Pages
-
Gutter Stone Clamp1 Pages
-
Wall Panel Lifting Gear2 Pages
-
Boulder Grab2 Pages
-
Flat Grab4 Pages
-
Screw Clamp1 Pages
-
Kerb Stone Lifter1 Pages
-
Border Stone Lifter1 Pages
-
Clamp For Upright Slabs1 Pages
-
Block Clamp1 Pages
-
Flat Clamp1 Pages
-
Motor for Manual Winch1 Pages
-
Aluminium Tripod with Winch1 Pages
-
Aluminium Tripod1 Pages
-
Manhole Cover Lifter1 Pages
-
Manhole Housing Grab1 Pages
-
Road Gully Grab1 Pages
-
Hydro Grab2 Pages
-
Round Clamp1 Pages
-
Round Grab2 Pages
-
Pipe Layer2 Pages
-
Pipe Puller4 Pages
-
Pipe Pulling Device2 Pages
-
Mini Pipe Puller1 Pages
-
Sheet Pile Clamp1 Pages
-
Pipe Chain Sling1 Pages
-
Pipe Laying Hook2 Pages
-
Manhole and Cone Lifter1 Pages
-
Pipe Grab1 Pages
-
Pipe Suspension Grab2 Pages
-
Manhole Clamp2 Pages
