Motor for Manual Winch
1Pages

{{requestButtons}}

Catalog excerpts

Motor for Manual Winch - 1

206 MOTOR FOR MANUAL WINCH Worm drive to be fixed to WIMAG rope winches Safety clutch operated by torque Construction in accordance with the Regulations for the Prevention of Accidents Use motorised crank and not the manual crank and place it on the square spigot of the rope winch. It guarantees easy operation without force for large lifting heights. The crank motor is equipped with a deadmans control as standard, guaranteeing maximum safety during lifting operation. Rotary Current Alternating Current Voltage Frequency Motor Power Volt Hz kW Amp Operating Time % ED Motor Speed approx. min1 Gear Torque Nm Number of revolutions min1 Protective System IP Weight approx. kg Delivery unit per motor: 5 m cable with CEE plug and rod for torque.

Open the catalog to page 1

All WIMAG GmbH catalogs and technical brochures

  1. Uni-Levator

    2 Pages

  2. Beta-Levator

    2 Pages

  3. Frame Crane

    2 Pages

  4. Gantry Crane

    2 Pages

  5. Lifting Beam

    4 Pages

  6. Stone Lifter

    1 Pages

  7. Stone Clamp

    1 Pages

  8. Boulder Grab

    2 Pages

  9. Flat Grab

    4 Pages

  10. Screw Clamp

    1 Pages

  11. Block Clamp

    1 Pages

  12. Flat Clamp

    1 Pages

  13. Hydro Grab

    2 Pages

  14. Round Clamp

    1 Pages

  15. Round Grab

    2 Pages

  16. Pipe Layer

    2 Pages

  17. Pipe Puller

    4 Pages

  18. Pipe Grab

    1 Pages

  19. Rope Winch

    4 Pages