*mydirectindustry

Catalogs
WIMAG GmbH
Manhole Clamp

Manhole Clamp

Product catalog summary

Overview: The document describes the specifications and features of a manhole clamp designed for the transport and laying of manholes. It emphasizes safety and ease of use, with no need for manual lifting or adjustment of the clamping range.

Specifications: The manhole clamp is compatible with manholes and cones according to DIN 4034 Parts 1 and 2. It features spring tension and can be equipped with either a web sling or high-strength chains. The clamp is designed to prevent accidents by eliminating the need for clamping range adjustments.

Models and Capacities: The document lists various models with different carrying capacities, ranging from 1,000 kg to 4,000 kg. Each model specifies the number of clamps per unit, contact surface of jaws, clamping range, suitable manhole inside diameter, length of web sling, and approximate weight.

Key Features: - Huge multiplication for optimum safety
- No manual lifting required
- Suitable for thin-walled, symmetrical, and asymmetrical conical manholes
- Patent application made for the clamp design

Table Summary: The table provides detailed specifications for each model, including order number, model type, carrying capacity, number of clamps, contact surface, clamping range, manhole diameter compatibility, web sling length, and weight.

Catalog excerpts

Simple applying and disconnecting by means of holdfast application: clamp must not be lifted manually No adjustment of the clamping range Huge multiplication guarantees optimum safety Manhole clamp SZA for manholes and cones according to DIN 4034 Part 1 and 2 With spring tension With web sling or high-strength chains

Open the catalog to page 1

The new generation: the manhole clamp with the huge multiplication for optimum safety The manhole clamp is used for the transport and laying of manholes. No adjustment of the clamping range is necessary. Accidents caused by incorrect adjustment are excluded. Due to the holdfast application the clamp must not be lifted when applying and disconnecting. The manhole clamp can be used for all standard manholes: thin-walled manholes SZA for manholes according to DIN 4034 Part 1 + 2 SZM for manholes according to DIN 4034 Part 2 symmetrical conical manholes (cones) according to DIN 4034 asymmetrical...

Open the catalog to page 2

Manhole Clamp

Manhole Clamp

Catalog excerpts

All WIMAG GmbH catalogs and technical brochures