*mydirectindustry

Catalogs
WIMAG GmbH
Beta-Levator

Beta-Levator

Product catalog summary

Overview: The Beta-Levator is a battery-operated vacuum lifter designed for manual operation, ideal for gardeners, landscapers, tilers, and the natural stone business. It is suitable for both smooth and rough, air-tight surfaces.

Specifications: The Beta-Levator features a robust aluminum box housing all components. It uses a vacuum pump to create suction, with an elastic rubber sealing the vacuum chamber. The self-adhesive seal is easily replaceable. The device includes rotatable resting feet to prevent seal damage.

Basic Equipment: The vacuum lifter is equipped with a two-man lifter adjustable in height (500 to 700 mm) and width (850 to 1,250 mm). Standard features include a water trap and a pressure gauge.

Battery Operation: The device is powered by a lithium-ion battery with no memory effect, allowing approximately 3 hours of continuous operation. The battery requires about 2 hours to charge using a 220 V-50 Hz charger.

Models and Capacities:

Model 816 200-3: Comes with a two-man lifter, two rechargeable batteries, and a charger (110-230 V). It has a carrying capacity of 100 kg, dimensions of 230 x 275 mm, and weighs 12 kg.
Model 816 400-1: Suction plate SP 150 with a carrying capacity of 150 kg, dimensions of 275 x 460 mm, and weighs 4 kg.

Usage Limitations: The vacuum lifter should only be used close to the ground and not with material handling lifting equipment. The maximum carrying capacity is achievable on optimal surfaces at a minimum pressure of -0.65 bar. The capacity decreases on rough or porous surfaces.

Catalog excerpts

Battery operated vacuum lifter for manual operation Ideal for gardeners and landscapers, tilers and the natural stone business For smooth and rough surfaces For all air-tight surfaces Subject to alteration I 07.2022

Open the catalog to page 1

Beta-Levator - the vacuum lifter for professionals All smooth/rough and air-tight plates can be easily lifted, transported and laid by the Beta-Levator. Immediately after the Levator is positioned, it attaches itself using suction. The Levator releases the plate, when required: open the valve. Specification The Beta Levator consists of a strong aluminium box with all component parts packed in. A vacuum pump creates the vacuum. The vacuum chamber is sealed by an elastic rubber. The self-adhesive sealing can easily be exchanged. To prevent the seal from damage, the Levator can be put up on both...

Open the catalog to page 2

Beta-Levator

Beta-Levator

Catalog excerpts

All WIMAG GmbH catalogs and technical brochures