SOLUTIONS FOR PRESS BRAKE TOOLING

ORDERING INFORMATION Standard Punch Lengths Short (S) 18" (457.2mm) Long (L) 36" (914.4mm) Sectionalized (X) 35.875" (911.2mm) (X) Sectional Widths: STRAIGHT TANG VS G STYLE TOOLING Wilson Tool now offers American-style press brake tooling featuring industry standard groove on its tang. Available in all the same profiles as our standard American tooling, Wilson’s "G-style" tooling is fully compatible with all clamping systems on the market today that require a groove in the tooling. Ear Piece When ordering a special ear section from Wilson Tool, please indicate the following dimensions. R.375...

TABLE OF CONTENTS PUSH BUTTON TOOL CHANGES Load and unload tools instantly with Wilson American’s unique click-in feature. Wilson’s patented push button technology eliminates the need for special clamps, holders or dedicated upper beams, significantly reducingcostly downtime. Precision Ground for Consistent Results. Wilson American Precision press brake tooling is precision ground to a tolerance of +/- .0008" (.02mm) on all critical dimensions to achieve the same precision and quality associated with European style press brakes. Available long (36"/914.4mm), short (18"/457.2mm) and sectionalized...

5.75" Acute Gooseneck 3.75" Acute Block Ref. only .750 [19.1] 3.75" Acute Block Punches Cat. No. Straight 50045 50046 50047G Note: ectionalized version does not include ear pieces (horns). S Ear pieces (horns) available at an additional cost. 5.75" Acute Gooseneck Punches Cat. No. A Angle Straight Groove 50209 50221 50227 All tonnages are based on direct load and do not apply for thrusting applications. [email protected] [email protected] [email protected]

arrow punches All tonnages are based on direct load and do not apply for thrusting applications. [email protected] [email protected] [email protected]

3.75" large gooseneck PUNCHES [email protected] [email protected] [email protected]

5.75" LARGE gooseneck punches PUNCHES All tonnages are based on direct load and do not apply for thrusting applications. [email protected] [email protected] [email protected]

3.75" SASH GOOSENECK PUNCHES [email protected] [email protected] [email protected]

5.75" Sash Gooseneck punches PUNCHES 5.75" Sash Gooseneck Punches CAT. No. Straight All tonnages are based on direct load and do not apply for thrusting applications. [email protected] [email protected] [email protected]

Block PUNCHES Note: Maximum tonnage per foot for: L & S = 40 tons; X = 30 tons. 5.75" Block Punches CAT. No. Straight Groove Note: Maximum tonnage per foot for: L & S = 40 tons; X = 30 tons. All tonnages are based on direct load and do not apply for thrusting applications. [email protected] [email protected] [email protected]

Sash Gooseneck Note: Maximum tonnage per foot for: S & X = 30 tons. All tonnages are based on direct load and do not apply for thrusting applications. [email protected] [email protected] [email protected] © 2012 Wilson Tool International®

Large Gooseneck [email protected] [email protected] [email protected]

Large radius holder & tip assembly CAUTION: Do not load the radius tip into the holder while in the machine. Remove the holder from the machine to change radius. Radius and Holder Length 19.685" [500mm] Radius Material # Radius Size Radius Price Holder Material # Holder Price Holder Width Holder & Radius Assembled Height Note: The large radius assemblies shown above are not designed to stage bend. Contact our sales desk if stage bending is needed. Make to order (MTO) sizes are available upon request. [email protected] [email protected] [email protected]

Note: Use theoretical sharp dimensions below to calculate tonnage & minimum flange. .500 Radius Center .404 Theoretical Sharp Radius Center Theoretical Sharp All tonnages are based on direct load and do not apply for thrusting applications. Note: 1.75" tall dies available upon request. [email protected] [email protected] [email protected]

staged arrow and large v dies Staged Arrow Dies All tonnages are based on direct load and do not apply for thrusting applications. Note: 1.75", 2.25", 2.75" tall dies available upon request. [email protected] [email protected] [email protected]

[email protected] [email protected] [email protected]

FLATTENING BLOCKS AND OFFSET TOOLS) 3.75" Flattening Blocks: Punch and Die Sets W Width inch (mm) 5.75" Flattening Blocks: Punch and Die Set CAT. No. FLATTENING & OFFSET 3.75" Offset Tool Punch and Die Sets CAT. No. Straight Groove T A Offset Dim. Angle inch (mm) ** T= Offset dimension top of sheet to top of form All tonnages are based on direct load and do not apply for thrusting applications. Note: Offset tools can be used as a punch or as a die. Sold as a set. Individual tools available. Dimensions are shut height requirements less material thickness. Offset height may vary as much as +/-.020"(0.5mm)...

TWO STAGE HEMMING [STAGED] All tonnages are based on direct load and do not apply for thrusting applications. 3.75" Two-Stage Hemming Punch and Die Set CAT. No. Two-stage hemming punch Note: Maximum material is 16 ga. cold rolled steel. [email protected] [email protected] [email protected]

American to American Straight Tang Note: ll holders include clamping set screws every 2" (50.8mm) A European Z2 to American Punch Holder Note: All holders include clamping set screws every 2" (50.8mm) All tonnages are based on direct load and do not apply for thrusting applications. [email protected] [email protected] [email protected]