786-500
786-500
- Dynamic: Sensitivity is 500 mV/g with an acceleration range of 10 g peak. Frequency response varies from 0.7 Hz to 14,000 Hz depending on the tolerance level. Resonance frequency is 30 kHz, and transverse sensitivity is a maximum of 5% of axial.
- Electrical: Requires a voltage source of 18-30 VDC and a current regulating diode of 2-10 mA. Electrical noise is specified at various frequencies, with a maximum output impedance of 100 Ω and a bias output voltage of 12 VDC.
- Environmental: Operates within a temperature range of -50 to 120°C, with vibration and shock limits of 500 g peak and 5,000 g peak, respectively. It is hermetically sealed and has a base strain sensitivity of 0.0002 g/µstrain.
- Physical: The sensing element design is PZT, shear, with a weight of 90 g. The case is made of 316L stainless steel, and it mounts via a 1/4-28 UNF tapped hole. The mating connector is R6 type, with recommended cabling of J10 / J9T2A.
- Rugged design with high sensitivity and hermetic seal.
- ESD and reverse wiring protection.
- Clear signals at low vibration levels and extended low-end frequency response.
- Improved signal-to-noise ratio compared to other general-purpose accelerometers.
- Capable of detecting both low and high-speed vibrations, optimized for slow-turning machinery.
Catalog excerpts
• Rugged design • High sensitivity • Hermetic seal • Reverse wiring protection • Clear signals at low vibration levels • Extended low end frequency response • Improved signal to noise ratio versus other general purpose accelerometers • A single sensor can detect both low and high speed vibrations • Optimized to detect vibration on slow turning machinery like cooling tower fans and slow speed gearboxes Wilcoxon Research model 786-500 General purpose low frequency accelerometer Temperature response: Power requirement: Electrical noise, equiv g1: internally shielded Accessories supplied: SF6 mounting stud (metric mounting available]; calibration data llevel 2] Note: 'Frequency response limits and spectral noise values are typical Due to continued research and product development, Meggitt Sensing Systems reserves the right to amend this specification without notice This document is cleared for public release Meggitt Sensing Systems 2051 1 Seneca Meadows Parkway Email: wilcoxonrameggitt.com extreme environments
Open the catalog to page 1All Wilcoxon Sensing Technologies catalogs and technical brochures
HT787A1 Page
731-2071 Page
iT4011 Page
787A1 Page
HT780A1 Page
780A-D21 Page
PCH420V-R6-HZ2 Pages
iT series1 Page
731A1 Page
728A and 728T1 Page
Cable_catalog_20125 Pages
MAST4 Pages
MACS brochure2 Pages
handheld vibration meters2 Pages
PC420V series2 Pages
712F1 Page
997-M41 Page
732-1D1 Page
732A/732AT1 Page
Archived catalogs
small size accelerometers1 Page
- Electrical cable
- Data connector
- Rectangular housing
- Electrical power supply connector
- Power cable
- Plastic housing
- Socket electrical connector
- Industrial connector
- IP67 connector
- Industrial housing
- Digital indicator
- Cable connector
- Piezoelectric accelerometer
- Straight connector
- Protection housing
- Armored cable
- IEPE accelerometer
- Coaxial connector