Acceleration range 80 g peak Transverse sensitivity, max 5% of axial Power requirement: Voltage source Current regulating diode Key features Electrical noise, equiv. g, nominal: Broadband 2.5 Hz to 25 kHz Bias output voltage Grounding Temperature range Vibration limit Shock limit Electromagnetic sensitivity, equiv. g, max Sealing Base strain sensitivity, max Sensing element design Weight Case material 500 gg 7 pg/VHz 4 pg/VHz 2 MQ/^Hz 100 a 12 vdc case isolated, internally shielded -55° to +120°C 500 g peak 5,000 g peak 70 gg/gauss hermetic 0.0002 g/pstrain PZT, shear 62 grams 316L stainless steel • Compact, lightweight • Class I, Div 2/Zone 2 certified, non-incendive • API 670 compliant • Manufactured in ISO 9001 facility Mounting 1/4-28 UNF tapped hole Output connector 2 pin, MIL-C-5015 style Mating connector R6 type Note: Frequency response limits and spectral noise values are typical. Accessories supplied: SF6 mounting stud; calibration data (level 2) Class I, Div 2 Groups A, B, C, D Class I, Zone 2 AEx/Ex nA II T4 Tamb: -50°C to 120°C Must be installed per 13029. • Ambient temperature range depends on the type cable used during installation. • Cable with FEP jacket, Ta=-50°C to +120°C. • Cable with Santoprene jacket, Ta=-45°C to +115°C. Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 8435 Progress Drive Frederick, MD 21701 USA buy.wilcoxon.com www.wilcoxon.com