Water & Wastewater Technology
56Pages

{{requestButtons}}

Catalog excerpts

Water & Wastewater Technology - 1

Pressure Temperature Level Calibration technology IwikaII ^ Part of your business

Open the catalog to page 1
Water & Wastewater Technology - 2

Alexander Wiegand, Chairman and CEO, WIKA As a family-run business acting globally, with over 9,000 highly qualified employees, the WIKA group of companies is a worldwide leader in pressure and temperature measurement. The company also sets the standard in the measurement of level and flow, and in calibration technology. With manufacturing locations around the globe, WIKA ensures flexibility and the highest delivery performance. Every year, over 50 million quality products, both standard and customer-specific solutions, are delivered in batches of 1 to over 10,000 units. Founded in 1946,...

Open the catalog to page 2
Water & Wastewater Technology - 3

Pictures: Photo KSB Aktiengesellschaft: P. 17

Open the catalog to page 3
Water & Wastewater Technology - 4

Water is the most important natural resource for both man and nature – and in seemingly abundant supply. Seemingly. Of all the immeasurable water supplies that our earth holds, only a small part is directly usable in reality. Almost everywhere where water is to be used for drinking, it must first be cleaned, softened, desalinated or sterilised. If we look at the earth's surface, then we see that more than 70 percent is water. Most, however, is seawater. Salty and undrinkable. Of the entire volume of all water resources, around 97 percent is salt water, and only about 3 percent is...

Open the catalog to page 4
Water & Wastewater Technology - 5

The thirst grows The global situation is worsening as the thirst for drinking water grows everywhere, and not only through the growth in world population. Here, a particularly large part is also played by agriculture, which today, averaged around the world, requires about 70 percent of all water supplies, industry a further 20 percent, and private housing around 10 percent. According to a forecast by the United Nations Environment Programme (UNEP), by 2025 the water demand from agriculture will have grown by 20 percent, in industry by 50 percent and in households by 80 percent. Water, and...

Open the catalog to page 5
Water & Wastewater Technology - 6

Drinking water Drinking water is the most elementary foodstuff – its supply therefore has the highest priority. For this reason, clean drinking water has been a UN human right since 2010. The high demands on quality and availability through strict laws, precise guidelines and corresponding structures are, generally, so perfectly fulfilled, that drinking water, for most people in the Western world, is taken for granted. The high investment that goes into an uninterrupted water supply is not even recognised by most consumers. Drinking water is obtained from the widest variety of sources:...

Open the catalog to page 6
Water & Wastewater Technology - 7

Drinking water From deep down In many countries, especially in Europe, the primary source of drinking water is from groundwater. In Germany this accounts for approximately 70 percent of the water supply. The water extracted from various depths – quite often several hundred metres under the earth's surface – as a rule is hygienically perfect. WIKA submersible pressure transmitters from stainless steel have been applied for many years in drinking water supply. The measuring instruments can be easily installed and operated completely submerged in water. They deliver reliable measuring signals...

Open the catalog to page 7
Water & Wastewater Technology - 8

From the sea Many populated centres with drinking water shortages are located right near the sea. The treatment of strongly saline seawater for usage to the quality of drinking water is a proven process. Through continuous development and optimisation, the production costs have been reduced dramatically and thus the desalination of seawater can be realised costeffectively. Desalination thus contributes globally to the securing of drinking water supplies which are able to satisfy the continuously rising demands of conurbations. Two treatment methods, in particular, have become established:...

Open the catalog to page 8
Water & Wastewater Technology - 9

■ Reverse osmosis is a filtration process, in which the seawater is forced through a diaphragm. In the process, the pollutants are retained by the diaphragm, while the cleaned water is collected for further use. Since, during osmosis, the molecules flow from an area with lower concentration to an area with higher concentration, so here we are speaking of a process that is the inverse of osmosis. ■ Distillation process or “MSP” (multi-stage flash evaporation) is a thermal process in which the seawater is passed through pipes via heat recovery zones and into the end heater. Here, the seawater...

Open the catalog to page 9
Water & Wastewater Technology - 10

To the consumer In most regions, drinking water is distributed to the consumer through supply networks. The components in these systems are water pipes, pressure regulation and measurement and monitoring devices. In most countries there are specific legal provisions that regulate the handling of drinking water. Examples: Thus, in the German Drinking Water Ordinance, the essence is described in § 1: “The purpose of the regulation is to protect human health from the adverse effects resulting from the contamination of water intended for human use, by ensuring its purity and fitness for...

Open the catalog to page 10
Water & Wastewater Technology - 11

Drinking water Hydrostatic level measurement Level sensors based on hydrostatic pressure measurement generally measure the level or filling height in a vessel in accordance with the following principle: A liquid generates, through its density and the force of gravity, a weight force which increases with the filling height. This weight force, increasing proportionally with the filling height, is called the liquid column, and is not dependent on, for example, foam, turbulence or vessel fittings. Hydrostatic pressure sensors are gaining in popularity within continuous level measurement through...

Open the catalog to page 11
Water & Wastewater Technology - 12

Process water The quality requirements for water used in industry depends, primarily, on its application within the production process (e.g. cooling, boiler feed or production water). To ensure the required water quality, depending on the quality of the raw water, a greater or lesser intensity of water treatment must be performed (filtration, softening, desalination, etc.). Ultrapure water, as in the food industry, thus increasingly becomes the standard. Strict legal requirements and cost pressure are forcing companies to adopt ever-more complex water management. The application and...

Open the catalog to page 12

All WIKA Alexander Wiegand SE & Co. KG catalogs and technical brochures

  1. FSD-3

    4 Pages

  2. A-10

    12 Pages

  3. 990.10

    6 Pages

  4. SC58

    3 Pages

  5. CS4R

    5 Pages

  6. CPG500

    6 Pages

  7. CPG1500

    11 Pages

  8. PM 01.15

    2 Pages

  9. BWX

    5 Pages

  10. BA, BAX

    5 Pages

  11. A2G-40

    3 Pages