*mydirectindustry

Catalogs
WIELAND ELECTRIC
AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)

Product catalog summary

Overview
The document provides comprehensive details on appliance terminals and terminal strips, focusing on their materials, configurations, and applications. It categorizes these components into pluggable terminal strips, appliance terminals, plug/screw terminal strips, and mains connectors.

Specifications

Terminal Strips: Sizes range from 1.5 mm² to 16 mm², constructed from glow-wire-resistant materials compliant with IEC 60 335-1.
Appliance Terminals: Made from glazed porcelain, steatite, or thermoset, featuring mounting holes and rails.
Plug/Screw Terminal Strips: Available in 2 to 12 poles, with tab/screw configuration options.
Mains Connectors: Offered in 3, 5, and 6 pole configurations with screw or tab connections.

Materials and Testing

Insulating housing made from Polyamide 6, tested for hardness at 125°C, glow-wire at 850°C, and tracking resistance PTI 250.
Clamping body is nickel-plated brass, with wire protection from phosphor bronze, and clamping screws are steel, zinc-plated, and dichromated.

Approvals and Ratings

Complies with EN 60335-1/DIN VDE 0700 T1 standards.
UL and CSA ratings ensure suitability for various voltage and current requirements.

Accessories

Marking plates and jumper bars for customization and enhanced functionality.
Insulating spacers for higher voltage applications.

Applications
Designed for high-temperature and extreme conditions, these terminal strips and connectors provide secure and vibration-proof connections, suitable for a wide range of electrical appliances and devices.

Additional Specifications
The document specifies pole configurations (3, 5, and 6 poles) with cut-out dimensions, requiring a metal sheet thickness of 1.5 mm and an air distance of 9.5 mm between terminals and the mounting base. Special versions with ground connections are available upon request.

Procedures
Details on using links as bridges between poles are provided, specifying configurations for different temperature conditions (210°C and 850°C). Information on screw terminals and tab connectors includes specific amperage and conductor size requirements.

Standards and Norms
Compliance with VDE standards and DIN specifications for ferrules and crimping tools is referenced. Materials such as polypropylene and E-Cu are specified for sleeves and tubes, respectively.

Recommendations
Recommendations include using ferrules with insulating sleeves for conductors ranging from 0.5 to 25 mm² and employing crimping tools for various contact types. A modular system for crimping tools is suggested, allowing for interchangeable dies and positioners.

Accessories and Tools
Listed accessories and tools include crimping tools for different wire gauges, stripping tools, and screwdrivers designed for terminal points in spring clamp technology. These tools feature adjustable lengths, integrated wire cutters, and ergonomic handles.

Key Data from Tables
Tables provide detailed measurements for different pole configurations, ferrule specifications, and part numbers for various components. They also include information on cross-sections, colors, and standard packaging for terminals and ferrules.

Catalog excerpts

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)-2

1383 Appliance Terminals, Terminal Strips Terminal Strips Appliance Terminals Plug/Screw Terminal Strips Mains connectors

Open the catalog to page 2

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)-3

1384 Subject to change without further notice Overview KL 16 PA compact Europa terminal strips • 1.5 mm2 to 16 mm2 • Pluggable terminal strips • Marking accessories • Terminal strips in glow-wire-resistant material according to IEC 60 335-1 Appliance terminals • With mounting holes • Made of glazed porcelain, steatite or thermoset • With mounting rails Plug/screw terminal strips 2 to 5 pole 2 to12 pole Tab/screw KL 17 N Mains connectors KL 58 • 3-, 5-, 6 pole with screw connection • 3-, 5-, 6 pole with 3 tab connectors Accessories aapppliapncelTiERaMINnALS ce

Open the catalog to page 3

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)-4

Subject to change without further notice 1385 Type 1027 Type 6 ES, Type 6 E 4 mm2 Type 16 E 10 mm2 Type 10 E 6 mm2 Type 20 E 16 mm2 Marking accessories Type KL 16 PA 2.5 mm2 with wire protection (DS) Type KL 16 PA 2.5 mm2 without wire protection Type 4 E 1.5 mm2 Type 6 EH 4 mm2 Type 1038 Terminal boxes Tools Page 1386/1387 Page 1388–1391 Page 1392/1393 Page 1394/1395 Page 1396/1397 Page 1398 Page 1400/1401 Page 1402/1403 Page 1404/1405 Lamp terminals Type 1032/1033 DIN terminal 46284 Type 1031/1029 Type KL 17 N/*.../K 1033 A P KR Type KL 20/2 PA 2 pole Type KL 20/4 PA 4 pole Type KL 24 2 to 5...

Open the catalog to page 4

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)-5

Poles Type Part No. Std. Pack Type Part No. Std. Pack 1386 Subject to change without further notice 5.5 M3 aapppliapncelTiERaMINnALS ce DIN VDE 0110 (fixed position) UL ratings CSA ratings EN 60335-1/DIN VDE 0700 T1 Approvals Type KL 16 PA 2.5 mm2 without wire protection 500 V/6 kV/3 No. 22-12 AWG 250 V 20 A No. 22-12 AWG 300 V 25 A AC 400 V; 10 A; 1 – 1.5 mm2/1 – 2.5 mm2 xqw Type KL 16 PA 2.5 mm2 with wire protection (DS) 500 V/6 kV/3 No. 22-12 AWG 250 V 20 A No. 22-12 AWG 300 V 25 A AC 400 V; 10 A; 1 – 1.5 mm2/1 – 2.5 mm2 xqw Material: Insulating housing: Polyamide 6 ivory Hardness test at...

Open the catalog to page 5

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)-9

Suitable for typees Poles Type Part No. Std. Pack Suitable for typees Type Part No. Std. Pack 1390 Subject to change without further notice aapppliapncelTiERaMINnALS ce Material: White, roughened plastic, 0.8 mm thick Permanent temperature up to 70 °C. Special plates to mark the terminals of clamping, solder and pluggable terminal strips are available. They can be marked before or after mounting or wiring of the terminals by using special ink Pelikan No. 32 or felt-tip pen “Feinmarker 23” by Faber Castell, or ink pen “Foliograph” by Riepe Werk Hamburg. Or they can be sealed with waterproof stamp...

Open the catalog to page 9

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)-10

Subject to change without further notice 1391 appliance The following terminals can be produced on request in glow-wire-resistant material according to IEC 60335-1: KL 16 PA 4 E 6 E 6 ES 6 EH 10 E 16 E 20 E KL 20 KL 24 KL 30 KL 17 N (not K) KL 58 Terminal strips in glow-wire-resistant material (according to IEC 60335-1)

Open the catalog to page 10

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)-11

Type Std. Pack Poles Part No. L W H Conductor clamping screw 1392 Subject to change without further notice aapppliapncelTiERaMINnALS ce Technical data: Conductor cross section Rated voltages according to VDE 0110 (position not fixed) 200 V/ 4 kV/ 3 400 V/ 4 kV/ 2 Materials Insulated housing Clamping body Screw * Continuous operation temperature: min. 250 °C (i.e. tested up to 250 °C, higher temperatures on request) Rated current (EN 60947-7-1): 24 A for 2.5 mm2 conductor 32 A for 4.0 mm2 conductor without wire protection 547 300 1 14.100.0170.0 10 22 15 M 3 548 200 2 14.100.0270.0 17.5 22 15...

Open the catalog to page 11

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)-12

Type Std. Pack Poles Part No. L W H Conductor clamping screw Mounting screw Subject to change without further notice 1393 appliance without wire protection 1032 100 2 14.200.0270.0 24 20 16 M 3* M4 1033 50 3 14.200.0370.0 38 20 16 M 3* M4 1033 A 50 4 14.200.0470.0 39 20 16 M 3* M4 1032 M 3.5 100 2 14.200.1270.0 24 20 16 M 3.5* M4 1033 M 3.5 50 3 14.200.1370.0 38 20 16 M 3.5* M4 1033 A M3.5 50 4 14.200.1470.0 39 20 16 M 3.5* M4 1032 DS 100 2 14.201.0270.0 24 20 16 M 3* M4 1033 DS 50 3 14.201.0370.0 38 20 16 M 3* M4 1033 A DS 50 4 14.201.0470.0 39 20 16 M 3* M4 Technical data: Conductor cross section...

Open the catalog to page 12

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)-13

Std. Pack Poles Part No. L W H Conductor clamping screw Mounting screw 1394 Subject to change without further notice without wire protection 100 2 14.210.0270.0 21 20 18 M3 M3.5 100 3 14.210.0370.0 34 20 18 M3 M3.5 100 2 14.211.0270.0 21 20 18 M3 M3.5 100 3 14.211.0370.0 34 20 18 M3 M3.5 Technical data: Conductor cross section 2.5 mm2 fine-stranded with ferrules (without wire protection) 4.0 mm2 solid (without wire protection) Rated voltages according to VDE 0110 (position not fixed) 250 V/ 4 kV/ 3 400 V/ 4 kV/ 2 Materials Insulated housing Clamping body Screw * Continuous operation temperature:...

Open the catalog to page 13

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)-14

Type Std. Pack Poles Part No. L W Hmax Conductor clamping screw Mounting screw Subject to change without further notice 1395 appliance without wire protection 1031 100 2 14.220.0270.0 24 25 18 M 3 M4 1029 50 3 14.220.0370.0 36 25 18 M 3 M4 Technical data: Conductor cross section 2.5 mm2 fine-stranded with ferrules 4.0 mm2 solid Rated voltages according to VDE 0110 (position not fixed) 250 V/ 4 kV/ 3 400 V/ 4 kV/ 2 Materials Insulated housing Clamping body Screw * Continuous operation temperature: min. 250 °C (i.e. tested up to 250 °C, higher temperatures on request) Rated current (EN 60947-7-1):...

Open the catalog to page 14

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)-15

Type Std. Pack Poles Part No. L W Hmax Conductor clamping screw Mounting screw 1396 Subject to change without further notice aapppliapncelTiERaMINnALS ce without wire protection 1027 30 2 14.230.0270.0 36 36 28 M 5 M5 Technical data: Conductor cross section 16 mm2 fine-stranded / solid Rated voltages according to VDE 0110 (position not fixed) 400 V/ 6 kV/ 3 Materials Insulated housing Clamping body Screw * Continuous operation temperature: min. 250 °C (i.e. tested up to 250 °C, higher temperatures on request) Rated current (EN 60947-7-1): 76 A for 16 mm2 conductor 6 M5 16 mm2 Type 1027 glazed...

Open the catalog to page 15

AT Catalog 2006 Page 1382-1409 (appliance terminals and electronic housings)-16

Type Std. Pack Poles Part No. L W H Conductor clamping screw Mounting screw Subject to change without further notice 1397 appliance without wire protection 1033 A P KR 100 4 14.290.0440.0 40 20 18.5 M 3 M5 1033 A P DS KR 100 4 14.291.0440.0 40 20 18.5 M 3 M5 Technical data: Conductor cross section – 2.5 mm2 fine-stranded with ferrules (without wire protection) – 4.0 mm2 solid (without wire protection) Rated voltages according to VDE 0110 (position not fixed) 250 V/ 4 kV/ 3 400 V/ 6 kV/ 2 Materials Insulated housing Clamping body Screw * Continuous operation temperature: max. 70 °C Rated current...

Open the catalog to page 16

All WIELAND ELECTRIC catalogs and technical brochures

Archived catalogs

AT Catalog 2006 Page 0290-0327
38 Pages