EXTENDED RANGE INDUCTIVE PROXIMITY SENSOR

Product catalog summary

Overview: This document provides technical specifications for extended range inductive proximity sensors. These sensors are available in various configurations, including shielded and non-shielded, with or without LED indicators.

Specifications:

Switching Distance (Sn): Available in 2 mm and 4 mm options.
Housing Material: Options include stainless steel or nickel-plated brass.
Protection Category: IP67, indicating high resistance to dust and water.
Operating Temperature: -25℃ to +70℃.
Voltage Range: Available for 10-30VDC, 10-55VDC, and 5-36VDC.
Switching Frequency: Up to 2KHz.
Response Time: 0.1ms/0.1ms for high frequency, 0.2ms/0.2ms for lower frequency.
Current Specifications: Max load current of 200mA, no load current <10mA, leakage current <0.01mA.
Voltage Drop: <1.5V.
Switching Hysteresis: <15%(Sr).
Repeat Accuracy: <1.0%(Sr).
Temperature Drift: <10%(Sr).
Short Circuit Protection: Yes.
Overload Trip Point: 220mA.

Connection Types: Sensors are available with M8 or M12 connectors, and some models use a Φ2M cable.

Weight: Varies by model, approximately 14g to 55g.

Models: Various models are listed, including ISN, ISS, and IBN series, each with different configurations for normally open (N.O.) and normally closed (N.C.) circuits.

Additional Information: Wiring diagrams are referenced for detailed installation instructions, available on specific pages of the document.

Catalog excerpts

EXTENDED RANGE INDUCTIVE PROXIMITY SENSOR (10-30VDC/10-55VDC/5-36VDC) Diameter Shielded non-Shielded Switching Distance, Sn: mm Housing Material Without LED With LED 2 mm 4 mm Stainless steel or Nickel plated brass 2 mm 4 mm Stainless steel or Nickel plated brass Ripple No Load Current Max. Load current Leakage Current Voltage Drop Switching Frequency Response Time Switching Hysteresis Repeat Accuracy Protection Category Operating Temperature Temperature Drift Short Circuit Protection Overload Trip Point Material Active Face Connecting type DC 3 wire 10-30V NPN N.O. DC 3 wire 10-30V NPN N.C. DC 3 wire 10-30V PNP N.O. DC 3 wire 10-30V PNP N.C. DC 3 wire 10-55V NPN N.O. DC 3 wire 10-55V NPN N.C. DC 3 wire 10-55V PNP N.O. DC 3 wire 10-55V PNP N.C. DC 3 wire 5-36 V NPN N.O. DC 3 wire 5-36 V NPN N.C. DC 3 wire 5-36 V PNP N.O. DC 3 wire 5-36 V PNP N.C. * Wiring diagram number. Please see the relevant wiring diagram shown on Page 013 to Page 015.

Open the catalog to page 1

EXTENDED RANGE INDUCTIVE PROXIMITY SENSOR-2

Open the catalog to page 2

EXTENDED RANGE INDUCTIVE PROXIMITY SENSOR-3

EXTENDED RANGE INDUCTIVE PROXIMITY SENSOR (10-30VDC/10-55VDC/5-36VDC) Diameter 2 mm 4 mm Nickel plated brass Shielded non-Shielded Switching Distance, Sn: mm Housing Material Without LED With LED 2 mm 4 mm Nickel plated brass Ripple No Load Current Max. Load current Leakage Current Voltage Drop Switching Frequency Response Time Switching Hysteresis Repeat Accuracy Protection Category Operating Temperature Temperature Drift Short Circuit Protection Overload Trip Point Material Active Face Connecting type DC 3 wire 10-30V NPN N.O. DC 3 wire 10-30V NPN N.C. DC 3 wire 10-30V PNP N.O. DC 3 wire 10-30V...

Open the catalog to page 3

EXTENDED RANGE INDUCTIVE PROXIMITY SENSOR

EXTENDED RANGE INDUCTIVE PROXIMITY SENSOR

Catalog excerpts

All WICK ELECTRONIC COMPANY LIMITED catalogs and technical brochures