ANALOG INDUCTIVE PROXIMITY SENSOR

1 / 1 PageView full catalog

ANALOG INDUCTIVE PROXIMITY SENSOR

Product catalog summary

Specifications:

Switching Distance (Sn): 1-7 mm for IBN-M1807G-I5EN4IBN-M1807G-I5VN2, 1-4 mm for IBS-M1804G-I5EN4IBS-M1804G-I5VN2
Housing Material: Nickel plated brass
Max. Ripple: <10%
No Load Current: <15mA
Output Current/Load Resistor: 0-20mA / 200Ω Max.
Linearity: <10%
Repeat Accuracy: 0.02mm
Ambient Temperature: -25℃ to +70℃
Temperature Drift: <5%(Sr)
Short Circuit Protection: Yes
Reverse Polarity Protection: Yes
Protection Category: IP67
Output Signal: PNP-ANALOG
Switch Frequency Max.: 100Hz
EMC: RFI>3V/m / EFT>1KV / ESD>4KV (contact)
Material Active Face: PBT
Connecting Type: M12 connector, Φ2M Cable (5.0 3x0.34)
Weight: approx. 70g for IBN-M1807G-I5EN4IBN-M1807G-I5VN2, approx. 145g for IBS-M1804G-I5EN4IBS-M1804G-I5VN2
Diameter: M18

Procedures and Standards:

Shock / Vibration: IEC 60947-5-2, Part 7.4.1 / IEC 60947-5-2, Part 7.4.2

Recommandations:

Refer to the wiring diagram on Page 013 to Page 015 for proper installation.

Catalog excerpts

ANALOG INDUCTIVE PROXIMITY SENSOR (CURRENT OUTPUT) Diameter Shielded non-Shielded Switching Distance, Sn: mm Housing Material Without LED With LED 1-4 mm Nickel plated brass 1-7 mm Nickel plated brass Max. Ripple No Load Current Output Current/Load Resistor Linearity Repeat Accuracy Ambient Temperature Temperature Drift Short Circuit Protection Reverse Polarity Protection Protection Category Output Signal Switch Frequency Max. EMC Shock / Vibration Material Active Face Connecting type Weight Analog Current Output (18-30VDC) * Wiring diagram number. Please see the relevant wiring diagram shown on Page 013 to Page 015.

Open the catalog to page 1

ANALOG INDUCTIVE PROXIMITY SENSOR

ANALOG INDUCTIVE PROXIMITY SENSOR

Catalog excerpts

All WICK ELECTRONIC COMPANY LIMITED catalogs and technical brochures