MEDIUM DUTY Hydraulic Motor & Brake
1 / 21Pages

Catalog excerpts

MEDIUM DUTY Hydraulic Motor & Brake - 2

For Medium Duty Applications Overview series descriptions The combination of compact size, light weight and low speed efficiency make the CE motor the best wheel drive motor available. To reduce overall motor length and weight, all unnecessary material was removed from the housing and the valve was placed in the face of the rotor. The pressurecompensated balance plate allows the motor to maintain high volumetric efficiences at startup and high mechanical efficiencies during running conditions. All of these features unite to make the CE Series motor 10-25% lighter and more compact than...

Open the catalog to page 2
MEDIUM DUTY Hydraulic Motor & Brake - 3

For Medium Duty Applications Displacement Performance Pressure - bar [psi] Overall Efficiency - Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] Rotor Width Overall Efficiency - 162 cm3 [9.9 in3] / rev Torque - Nm [lb-in], Speed rpm 2 [0.5] Theoretical Torque - Nm [lb-in] 121 cm3 [7.4 in3] / rev Torque - Nm [lb-in], Speed rpm Theoretical Torque - Nm [lb-in] 45 [394] Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] Performance data is typical. Performance of production units varies slightly from one motor to another. DELIVERING THE...

Open the catalog to page 3
MEDIUM DUTY Hydraulic Motor & Brake - 4

For Medium Duty Applications displacement Performance Pressure - bar [psi] Overall Efficiency - Intermittent Ratings - 10% of Operation Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] Rotor Width Overall Efficiency - Intermittent Ratings - 10% of Operation 233 cm3 [14.2 in3] / rev Torque - Nm [lb-in], Speed rpm 2 [0.5] Theoretical Torque - Nm [lb-in] 204 cm3 [12.4 in3] / rev Torque - Nm [lb-in], Speed rpm Theoretical Torque - Nm [lb-in] 64 [565] Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] Performance data is typical. Performance...

Open the catalog to page 4
MEDIUM DUTY Hydraulic Motor & Brake - 5

For Medium Duty Applications Displacement Performance Pressure - bar [psi] Overall Efficiency - Intermittent Ratings - 10% of Operation Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] Rotor Width Overall Efficiency - Intermittent Ratings - 10% of Operation Theoretical Torque - Nm [lb-in] 82 [729] 300 cm3 [18.3 in3] / rev Torque - Nm [lb-in], Speed rpm 2 [0.5] Theoretical Torque - Nm [lb-in] 261 cm3 [15.9 in3] / rev Torque - Nm [lb-in], Speed rpm Performance data is typical. Performance of production units varies slightly from one motor to another. Displacement...

Open the catalog to page 5
MEDIUM DUTY Hydraulic Motor & Brake - 6

For Medium Duty Applications displacement Performance Pressure - bar [psi] Overall Efficiency - Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] Rotor Width Overall Efficiency - Theoretical Torque - Nm [lb-in] 103 [908] Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] DELIVERING THE POWER TO GET WORK DONE 375 cm3 [22.8 in3] / rev Torque - Nm [lb-in], Speed rpm 2 [0.5] Theoretical Torque - Nm [lb-in] 348 cm3 [21.2 in3] / rev Torque - Nm [lb-in], Speed rpm Performance data is typical. Performance of production units varies slightly from...

Open the catalog to page 6
MEDIUM DUTY Hydraulic Motor & Brake - 7

For Medium Duty Applications Displacement Performance Pressure - bar [psi] Overall Efficiency - Rotor Width Overall Efficiency - Intermittent Ratings - 10% of Operation 4 Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] 536 cm3 [32.7 in3] / rev Torque - Nm [lb-in], Speed rpm 2 [0.5] Theoretical Torque - Nm [lb-in] 465 cm3 [28.3 in3] / rev Torque - Nm [lb-in], Speed rpm Theoretical Torque - Nm [lb-in] 147 [1302] Performance data is typical. Performance of production units varies slightly from one motor to another. Displacement tested at 54°C [129°F] with an oil...

Open the catalog to page 7
MEDIUM DUTY Hydraulic Motor & Brake - 8

For Medium Duty Applications Displacement Performance Pressure - bar [psi] Overall Efficiency - Intermittent Ratings - 10% of Operation 3 748 cm3 [45.6 in3] / rev Torque - Nm [lb-in], Speed rpm Theoretical Torque - Nm [lb-in] 205 [1815] Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] Performance data is typical. Performance of production units varies slightly from one motor to another. DELIVERING THE POWER TO GET WORK DONE

Open the catalog to page 8
MEDIUM DUTY Hydraulic Motor & Brake - 9

Hydraulic Motor Dimensions shown are without paint. Paint thickness can be up to 0.13 [.005]. 4-HOLE, WHEEL MOUNT, ALIGNED PORTS OPTIONAL VALVE CAVITY E: 10 Series/2-Way Valve Cavity 7/8-14 UNF F: Valve Cartridge Installed Dimension GG is charted on page 10. DELIVERING THE POWER TO GET WORK DONE

Open the catalog to page 9
MEDIUM DUTY Hydraulic Motor & Brake - 10

Hydraulic Motor technical information Allowable Shaft Load / Bearing curve The bearing curve represents allowable bearing loads based on ISO 281 bearing capacity for an L10 life of 2,000 hours at 100 rpm. Radial loads for speeds other than 100 rpm may be calculated using the multiplication factor table below. length & weight chart Dimension GG is the overall motor length from the rear of the motor to the mounting flange surface and is referenced on detailed housing drawings listed on pages 9, 12 & 15. All CE series motor weights can vary ± 0.5 kg [1 lb] depending on model configurations...

Open the catalog to page 10
MEDIUM DUTY Hydraulic Motor & Brake - 11

Hydraulic Motor ordering information 1. CHOOSE SERIES DESIGNATION 400 Counterclockwise Rotation 4. SELECT A SHAFT OPTION 20 5. SELECT A PAINT OPTION A The 400 & 401 series are bi-directional. Reversing the inlet hose will reverse shaft rotation. For applications requiring the motor to rotate in only one direction, shaft seal life may be prolonged by pressurizing the A port of the motor. 2. SELECT A DISPLACEMENT OPTION Black, Unpainted Mounting Surface 6. SELECT A VALVE CAVITY / CARTRIDGE OPTION A Valve Cavity Only 7. SELECT AN ADD-ON OPTION W31 4-Hole, Wheel Mount, Aligned Ports, 7/8-14 UNF...

Open the catalog to page 11
MEDIUM DUTY Hydraulic Motor & Brake - 12

Hydraulic Motor With Medium Duty Bearing white drive pro ducts 4-HOLE, 3.25" PILOT WHEEL MOUNT, ALIGNED PORTS ► Dimensions shown are without paint. Paint thickness can be up to 0.13 [.005]. 4-HOLE, 3.50" PILOT WHEEL MOUNT, ALIGNED PORTS W31 7/8-14 UNF W35 9/16-18 UNF | W38 G 1/2 ► Dimension GG is charted on page 10. DELIVERING THE POWER TO GET WORK DONE

Open the catalog to page 12

All White Drive Products catalogs and technical brochures

  1. RS

    36 Pages

  2. HP 30

    42 Pages

  3. VIS 40, 45

    65 Pages

  4. OMSW

    21 Pages

  5. OMS

    53 Pages

  6. FD

    6 Pages

  7. SB

    7 Pages

  8. D9

    14 Pages

  9. DT

    18 Pages

  10. DR

    23 Pages

  11. RE

    27 Pages

  12. CE

    21 Pages

  13. WS

    26 Pages

  14. HB/HK

    22 Pages

  15. WG

    22 Pages

  16. WR

    18 Pages

  17. RS

    15 Pages

  18. WP

    18 Pages

  19. WD

    14 Pages

  20. WM

    8 Pages

  21. HB

    20 Pages

Archived catalogs

  1. Product Catalog

    258 Pages

  2. RS

    16 Pages

  3. WS

    22 Pages

  4. FD

    6 Pages

  5. DT

    20 Pages

  6. RG Series

    32 Pages