whitedriveproducts LIGHT DUTY Hydraulic Motor SERIES 200 201 - RS

For Light Duty Applications white drive pro ducts RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech. Unlike competitive products using power robbing, two-piece rotor set designs with sliding contact points, RS Series motors utilize the patented Roller Stator® design. Seven precision rollers for the contact points reduce friction, pro- viding more power and longer life foryour application. Each output shaft is custom ground to maintain exact tolerances between the housing and shaft, producing high volumetric efficiencies. Industry standard...

white drive pro ducts For Light Duty Applications DISPLACEMENT PERFORMANCE Torque - Nm [Ib-in], Speed rpm Intermittent Ratings -10% of Operation Theoretical Torque - Nm [Ib-in] Displacement tested at 54DC [129DF] with an oil viscosity of 46cSt [213 SUS] Torque - Nm [Ib-in], Speed rpm Intermittent Ratings -10% of Operation Theoretical Torque - Nm [Ib-in] Displacement tested at 54DC [129DF] with an oil viscosity of 46cSt [213 SUS] Torque - Nm [Ib-in], Speed rpm Intermittent Ratings -10% of Operation Theoretical Torque - Nm [Ib-in] ► Performance data is typical. Performance of production units varies...

For Light Duty Applications white drive pro ducts DISPLACEMENT PERFORMANCE Torque - Nm [Ib-in], Speed rpm Intermittent Ratings -10% of Operation Theoretical Torque - Nm [Ib-in] Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] Torque - Nm [Ib-in], Speed rpm Intermittent Ratings -10% of Operation Theoretical Torque - Nm [Ib-in] Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] ► Performance data is typical. Performance of production units varies slightly from one DELIVERING THE POWER TO GET WORK DONE

For Light Duty Applications DISPLACEMENT PERFORMANCE Torque - Nm [Ib-in], Speed rpm Intermittent Ratings -10% of Operation Theoretical Torque - Nm [Ib-in] Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] Torque - Nm [Ib-in], Speed rpm Intermittent Ratings -10% of Operation Theoretical Torque - Nm [Ib-in] Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] ► Performance data is typical. Performance of production units varies slightly from one DELIVERING THE POWER TO GET WORK DONE

For Light Duty Applications white drive pro ducts DISPLACEMENT PERFORMANCE Torque - Nm [Ib-in], Speed rpm Intermittent Ratings -10% of Operation Theoretical Torque - Nm [Ib-in] Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] Torque - Nm [Ib-in], Speed rpm Intermittent Ratings -10% of Operation Theoretical Torque - Nm [Ib-in] Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] ► Performance data is typical. Performance of production units varies slightly from one DELIVERING THE POWER TO GET WORK DONE

For Light Duty Applications DISPLACEMENT PERFORMANCE Torque - Nm [Ib-in], Speed rpm Intermittent Ratings -10% of Operation Theoretical Torque - Nm [Ib-in] Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] Torque - Nm [Ib-in], Speed rpm Intermittent Ratings -10% of Operation Theoretical Torque - Nm [Ib-in] Displacement tested at 54°C [129°F] with an oil viscosity of 46cSt [213 SUS] ► Performance data is typical. Performance of production units varies slightly from one DELIVERING THE POWER TO GET WORK DONE

Light Duty Hydraulic Motor white drive pro ducts 4-HOLE, SQUARE MOUNT, ALIGNED PORTS ► Dimensions shown are without paint. Paint thickness can be up to 0.13 [.005]. 4-HOLE, SQUARE MOUNT, ALIGNED MANIFOLD PORTS F37 1/2" Drilled 4-HOLE, SQUARE MOUNT, OFFSET MANIFOLD PORTS, VALVE CAVITY ► Dimension H is charted on page 12. DELIVERING THE POWER TO GET WORK DONE

white drive pro ducts Light Duty Hydraulic Motor 2-HOLE, SAE B MOUNT, ALIGNED PORTS ► Dimensions shown are without paint. Paint thickness can be up to 0.13 [.005]. 2-HOLE, SAE B MOUNT, SIDE PORTS ► Dimension I is charted on page 12. DELIVERING THE POWER TO GET WORK DONE

Light Duty Hydraulic Motor white drive pro ducts TECHNICAL INFORMATION ALLOWABLE SHAFT LOAD / BEARING CURVE The bearing curve below represents the side load capacity of the motor at the centerline of the key for various motor speeds. Operating conditions within the shaded area will maintain acceptable oil film lubrication with recommended fluids. Operating conditions outside the shaded area are susceptible to motor failure due to oil starvation and/or excessive heat generation. Fluids with low lubricity or low viscosity may require the maximum load and speed rat- ings to be derated to provide...

white drive pro ducts Light Duty Hydraulic Motor ► A slotted hex nut is standard on this MOUNTING / SHAFT LENGTH CHART Dimension J is the overall distance from the motor mounting surface to Additional shaft length information, if necessary, is noted as J2 and does not increase or decrease the listed J dimensions in this chart. The overall shaft lengths are already factored into the overall distance from the mount- DELIVERING THE POWER TO GET WORK DONE

Light Duty Hydraulic Motor white drive pro ducts ORDERING INFORMATION 1. CHOOSE SERIES DESIGNATION ► The 200 & 201 series are bi-directional. Reversing the inlet hose will reverse shaft rotation. For applications requiring the motor to rotate in only one direction, shaft seal life may be prolonged by pressurizing the B port of the motor. 2. SELECT A DISPLACEMENT OPTION 3. SELECT A MOUNT & PORT OPTION 2-Hole, SAE A Mount, Aligned Ports, 1/2-14 NPT 2-Hole, SAE A Mount, Aligned Ports, 7/8-14 UNF 2-Hole, SAE A Mount, Offset Ports, G 1/2 2-Hole, SAE A Mount, Offset Manifold Ports, G 1/2 2-Hole, SAE...

North America White Drive Products, Inc. White Drive Products GmbH White (China) Drive Products Co., Ltd. 1-8 Ning Zhen Gong Lu Zhenjiang, 212021, Jiangsu, China wh ited rive prod u cts