1. Catalogs
  2. White Drive Motors And Steering
  3. RS D9 Series Hydraulic Motors
video corpo

RS D9 Series Hydraulic Motors

RS D9 Series Hydraulic Motors
1 / 16 PagesView full catalog

RS D9 Series Hydraulic Motors

Product catalog summary
Overview: The document is a technical catalog for the D9 Series hydraulic motors by White Drive Products. These motors are the largest in their family, offering high torque and a variety of displacements and shaft options. They are equipped with dual tapered roller bearings for enhanced load capacity and are designed to use a case-drain to extend motor life.
Specifications: The motors feature industry-standard mounting flanges and nine displacement options, providing flexibility in design. They utilize the Roller Stator® design with an 8-lobe rotor and 9-pocket stator technology. Key specifications include pressure ratings in bars and psi, theoretical torque in Nm and lb-in, and efficiency ratings. The document also provides guidelines for intermittent operation.
Performance: Detailed performance data is provided for each displacement option, including torque, speed, flow, and pressure metrics. The motors are rated for intermittent and peak operations, with efficiency ranging from 70-100% under optimal conditions. Theoretical torque and speed are outlined for various pressure levels.
Mounting and Dimensions: The catalog includes detailed dimensions for various mounting options, such as SAE C Mount and 160mm Pilot. It also provides length and weight charts for different configurations, with notes on paint thickness and motor weight variations.
Bearing Load Information: Bearing curves based on ISO 281 standards are included, indicating an L10 life of 2,000 hours at 100 rpm. A multiplication factor table is provided for calculating radial loads at different speeds.
Shaft Options: Various shaft configurations are detailed, including straight, tapered, and spline options, with maximum torque ratings. Specific shaft lengths and mounting flange details are also provided.
Model Code Builder: A step-by-step guide is included for selecting series, displacement, mounting, shaft, paint, cavity, and miscellaneous options to configure a motor model.
Porting Options: Different porting configurations are outlined, including split flange and BSP.F options, with notes on case drain requirements to prevent seal failure.
Contact Information: Contact details for White Drive Products in the USA, Germany, and China are provided, including phone numbers, fax numbers, and email addresses.
See more

Catalog excerpts

RS D9 Series Hydraulic Motors-1

D9 SERIES HYDRAULIC MOTORS

 Open the catalog to page 1
RS D9 Series Hydraulic Motors-2

2 DELIVERING THE POWER TO GET WORK DONE whitedriveproducts D9 Specifications overview key features Intermittent Ratings - 10% of Operation Peak Ratings - 1% of Operation The D9 Series of motor is the largest member of the White Drive Product’s family. The product is capable of producing torque values comparable to competitive motors, but with an industry leading breadth of displacements and shaft and porting options. In addition, the product incorporates dual tapered roller bearings, which improve load carrying capabilities. The motor is designed for use with a case-drain, which reduces pressure...

 Open the catalog to page 2
RS D9 Series Hydraulic Motors-11

11 DELIVERING THE POWER TO GET WORK DONE whitedriveproducts D9 800 & 801 Series porting options Q - Case Drain 15 [.59] 15 [.59] 67 [2.64] 74 [2.92] Q 15 [.60] 100° 50° Q 66 [2.61] 53 [2.10] 74 [2.92] 37 [1.46] 50° B A 93 [3.65] 93 [3.65] B A 37 [1.46] 60 [2.37] 90 [3.55] 54 [2.13] 29 [1.16] 59 [2.31] 0 1-1/4” Split Flange with 3/4” O-Ring Drain Port NOTE: The D9 is designed to run with a case drain. Sealing off the case drain can over-pressurize the shaft seal causing seal failure. 9 1-5/16” O-Ring with 3/4” O-Ring Drain Port (8) 7/16 -14 UNC Thread

 Open the catalog to page 11
RS D9 Series Hydraulic Motors-15

15 DELIVERING THE POWER TO GET WORK DONE whitedriveproducts D9 800 & 801 series model code builder SERIES DISPLACEMENT HOUSING SHAFT PAINT CAVITY ADD ON MISCELLANEOUS STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 STEP 8 STEP 1 - Select a series STEP 2 - Select a displacement option C8 E8 D8 W8 STEP 3 - Select a mounting option 4-Hole SAE C Mount 5” Pilot Side Ports 4-Hole SAE C Mount 125mm Pilot Side Ports 4-Hole 160mm Pilot Side Ports 4-Hole Wheel Mount Side Ports STEP 5 - Select a paint option Black Black (unpainted flange face) No Paint A B Z STEP 8 - Select a miscellaneous option AA None...

 Open the catalog to page 15
RS D9 Series Hydraulic Motors-16

Delivering The Power To Get Work Done. White Drive Products, Inc. P.O. Box 1127 Hopkinsville, KY. USA 42241 Phone: +1.270.885.1110 Fax: +1.270.886.8462 [email protected] www.whitedriveproducts.com White Drive Products GmbH Halskestrasse 15 D-40880 Ratingen, Germany Phone: +49 2102-1237770 Fax: +49 2102-1237779 [email protected] United States Germany White (China) Drive Products Co., Ltd. 1-8 Ning Zhen Gong Lu Zhenjiang, 212021, Jiangsu, China Phone: +86 511 5729988 Fax: +86 511 5728921 [email protected] China D9 Series Catalog - rev. 4.23.09

 Open the catalog to page 16

Archived catalogs

  1. OMS

    53  Pages

  2. OMSW

    21  Pages

  3. VIS 40, 45

    65  Pages

  4. HP 30

    42  Pages

  5. WM

    8  Pages

  6. WD

    14  Pages

  7. WP

    18  Pages

  8. WR

    18  Pages

  9. WG

    22  Pages

  10. HB/HK

    22  Pages

  11. WS

    26  Pages

  12. CE

    21  Pages

  13. RE

    27  Pages

  14. DR

    23  Pages

  15. DT

    18  Pages

  16. BK series 913

    4  Pages

  17. SB

    7  Pages

  18. FD

    6  Pages

  19. HB

    20  Pages

  20. D9

    14  Pages

  21. Product Catalog

    258  Pages

  22. FD

    6  Pages

  23. BK series 910

    4  Pages

  24. DT

    20  Pages

  25. WS

    22  Pages

  26. RG Series

    32  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.