white bream White Bream Oud-Beijerland Description: Reference manual Project: P942 The Netherlands https://whitebream.com P942RP004 Manual Repeater I.O.odt

CAN-bus Repeater Reference manual

Reference manual

CAN-bus Repeater Reference manual Preface Disclaimer White Bream products are not authorized for use in, or in connection with surgical implants, or as critical components in any medical or nuclear, or aircraft, or other transportation devices or systems where failure to perform can reasonably be expected to cause significant injury to the user, without the express written approval of an executive officer of White Bream. Such use is at buyer's sole risk, and buyer is responsible for verification and validation of the suitability of products incorporated in any such devices or systems. Buyer agrees...

CAN-bus Repeater Reference manual This device provides a repeater function between three CAN-bus segments. The first segment connects via a DIN-rail mounted T-bus or via an ordinary 5-way terminal block and provides power for the logic core and the second segment. The optional second segment connects via fibre-optical cable with ST connections. The third segment is a normal 'copper' CAN-bus with ATEX intrinsic safe isolation and safety parameters. This allows for installing interfaces and sensors inside a 'Zone 2 or zone 22' potentially explosive environments. Two- or three-way CAN-bus bridge...

CAN-bus Repeater Reference manual Operation Indicators Orange/red = power fail Green = okay Green = RX (dominant) Red = RX stuck dominant Optical link RX activity Green = RX (dominant) Red = RX stuck dominant Intrinsic safe RX activity Green = RX (dominant) Red = RX stuck dominant De device does not provide any controls.

CAN-bus Repeater Reference manual Draft CAN-bus Repeater Reference manual Draft 4 Specifications 4.1 Electronic Parameter White Bream © 2019 page 7 / 19 P942RP004

CAN-bus Repeater Reference manual Draft White Bream © 2019 page 8 / 19 P942RP004

CAN-bus Repeater Reference manual Draft White Bream © 2019 page 9 / 19 P942RP004

CAN-bus Repeater Reference manual

CAN-bus Repeater Reference manual Draft 5 Installation Always follow applicable installation codes over instructions in Please get in touch if you encounter a conflict between this man manual. al and any such code. Our instructions assume that you have basic knowledge of-industrial Wiring and electrical installations. As such, we do not provide instructions for/basic activities such as stripping of wires. 5.1 Mounting The device is to be mounted on a section of 35 the system, we can provide short sections of sucftxr; not already available in request. 5.2 Wiring The primary CAN-bus can be connected...

CAN-bus Repeater Reference manual Note that each CAN-bus repeater accounts for approximately 20 meters of cable length, which is to be subtracted from the allowable trunk or spur length. Also, connections via optical fibre must be considered as if it were regular CAN-bus cable. That's because the propagation through the fibre core is not significatly different from the electrical signal propagation through copper. Please be aware of cable resistance and associated voltage drop. Once the lengths go into the three-digit figures, these losses can become quite significant, especially with small conductor...

CAN-bus Repeater Reference manual 5.4.1 IEC 60079-11 and IEC 60079-25 compatibility Note that the intrinsic safe circuits require a separation of ≥ 50mm from 'normal' circuits. Separation to other IS circuits only requires 6mm. So multiple devices can be installed next to each other, but when installed next to other devices, a suitably solid isolation plate or earthed metal plate must be installed between the connection areas. For more details, contact us or refer to IEC 60079-11. The device contains three 125mA ultra-fast fuses on each CAN interface. One in the power supply input and one in...

CAN-bus Repeater Reference manual Draft White Bream © 2019 page 14 / 19 P942RP004

CAN-bus Repeater Reference manual Draft Initial version White Bream © 2019 page 15 / 19 P942RP004

CAN-bus Repeater Reference manual Annex A: Declaration of Conformity for ATEX & CE The manufacturer hereby declares that this product is according to the requirements of annex II of the EEC directive 2014/34/EC regarding ATEX and directive 2014/30/EU regarding electromagnetic compatibility (EMC), directive 2014/35/EU regarding low voltage equipment (LVD) and directive 2011/65/EU regarding RoHS. Manufacturer, facility: White Bream L.J. Costerstraat 13d 3261LH, Oud-Beijerland The Netherlands CAN-bus Repeater & isolator DIN-rail 80-942-131, 80-942-231 or 80-942-X31, with X being a number between...

CAN-bus Repeater Reference manual This product has been found in conformity with directive 2014/34/EU (ATEX) by testing and verification with the following standards: • • • • • EN 60079-0:2018 Explosive atmospheres – Part 0: General requirements EN 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" EN 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n" EN 60079-28:2015 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation EN 60079-31:2014 Explosive atmospheres...

CAN-bus Repeater Reference manual Annex B: Declaration of Conformity for FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential...

white bream L.J. Costerstraat 13d 326ILH Oud-Beijerland The Netherlands https://whitebream.com https://whitebream.nl Reference manual CAN-bus Repeater