video corpo

Product Guide 2009
23Pages

{{requestButtons}}

Catalog excerpts

Product Guide 2009 - 1

Product Guide Industrial Data Communications   Robust Industrial Data Communications – Made Easy

Open the catalog to page 1
Product Guide 2009 - 2

Westermo      Worldwide... Produced by:  Westermo Teleindustri AB Photo:  IStockphoto, BildN, Västerås, Sweden  Illustrations:  Visual Information Sweden AB Eskilstuna, Sweden Specifications are subject to change without notice due to continuous product development and improvement. Westermo was established in the early 1970s. The head office is located 150 km (93.2 miles) southwest of Stockholm in Sweden. Over the past three decades Westermo has grown with subsidiaries being established in Sweden, UK, Germany, France, Singapore and sales partners appointed in over 30 Countries worldwide....

Open the catalog to page 2
Product Guide 2009 - 3

Industrial Routing Switches Industrial networks have particular requirements that make them differ from normal IT networks where high reliability, real-time switching functions and environmental specifications are required. The RedFox has been developed with unique switching functionality like FRNT redundancy protocol, IGMP snooping, VLANs as well as layer 3 routing to meet the latest market requirements. Corporate Network Ethernet is rapidly becoming the most common communication standard deployed in industrial applications and it has become clear that the next generation of industrial...

Open the catalog to page 3
Product Guide 2009 - 4

RedFox Industrial Routing Switch The RedFox is a high performance industrial Ethernet switch with enhanced routing functionality in a single robust unit. A single RedFox allows you to build cost effective, secure and reliable networks that would previously have required several different units.The feature- rich firmware and highly specified hardware provide flexibility and enhanced performance when building complex networks. For mission critical applications our unique FRNT technology is the fastest protocol on the market for re-configuring large networks in the event of link or hardware...

Open the catalog to page 4
Product Guide 2009 - 5

Ethernet Switches Ethernet in industrial environments must be very reliable as downtime is much less tolerable in the factory than the office. Harsh environments with electrical noise and vibrations require equipment of very highest quality.  Westermo offers a wide product range, from unmanaged switches up to the fastest redundant ring switch on the market.  Our unique FRNT technology allows for up to 200 switches in the network and a recovery time of less than 20 ms. Many roadside applications have begun to use Ethernet networks to provide connectivity for roadside equipment such as...

Open the catalog to page 5
Product Guide 2009 - 6

Ultra Slim M12 Switch One Switch, many solutions The Lynx is a family of switches consisting of six models with different function levels, giving you the ability to select the perfect switch for your application providing optimum functionality at the best value. The Lynx family can be configured with either 100 Mbit or Gigabit transceivers, the transceivers are then available for ranges up to 120 km. Our unique FRNT (Fast Recovery of Network Topology) technology is the fastest protocol on the market to re-configure a large network in the event of any failure of a link or hardware. That is...

Open the catalog to page 6
Product Guide 2009 - 7

Ethernet Media Converter Customer Success Story The MCW-211 convert data between Ethernet 10/100BaseT and 100BaseFX. The unit is easy to use and install caused by auto-negotiation of speed and duplex, autocrossover and auto-polarity.The media converter is transparent for large frames (VLAN or QoS). It is also possible to set speed, duplex and flow control via DIP-switches. The FX side supports Far-End-Fault indication. A link fault from either side is forwarded to the other side, Link Fault Forwarding. …… 10/100BaseT to 10/100BaseFX conversion …… Auto negotiation or manual DIPswitch port...

Open the catalog to page 7
Product Guide 2009 - 8

Ethernet Extenders Ethernet Extenders allow you to ignore the conventional Ethernet boundaries for copper cable. By design, a standard Ethernet network has a transmission limit of 100 metres (328 ft) over UTP copper cables, our ethernet extender series – the Wolverine, allows you to go much further and on many other kinds of cable.  The Wolverine series utilises SHDSL technology on twisted pair cables to establish a high-speed remote connection between two Ethernet Networks. Westermo have many years experience in both data communication technologies and railway applications and has...

Open the catalog to page 8
Product Guide 2009 - 9

Extend your network far beyond the normal limits of Ethernet The Wolverine series is the ideal solution for extending your Ethernet network over copper cables where in the past the only option would have been fibre. At shorter ranges the data rate can be as high as 5.7 Mbit/s in both directions.The technology used suggests transmission distances of up to 10 km (6.2 miles) at lower data rates. In practical applications however much greater distances have been achieved. The SHDSL transmission technology makes the Wolverine series perfect for the reuse of existing copper cable installations...

Open the catalog to page 9
Product Guide 2009 - 10

Remote Access The ability to create remote connections to equip- ment can provide companies great savings both in time and money. Not only this, but improved customer service can also be offered. It is possible to control, monitor, update software or fault find, irrespective of where the equipment is located, by means of a simple remote connection. Being able to connect to a remote server whilst working from home or using a laptop PC when travelling makes for much more efficient and flex- ible working conditions for many support engineers. Pumping stations and waste water facilities are...

Open the catalog to page 10
Product Guide 2009 - 11

Industrial 3G HSUPA Routers ADSL 2/2+ Router The MRD-310 and MRD-330 are two robust HSUPA routers designed to provide remote connectivity across mobile networks.  The unit features an on-board two port switch, up to three serial ports, and the possibility to four digital I/O providing the unit with versatile connection options. The MRD-series supports a wide variety of wireless standards, thus providing connectivity in a vary of applications. Secure connectivity can be achieved using a VPN which creates secure tunnels over insecure networks. …… Dual-Band UMTS / HSDPA / HSUPA Router ……...

Open the catalog to page 11

All Westermo catalogs and technical brochures

  1. DDW-242

    2 Pages

  2. MD-12

    2 Pages

  3. WeConfig

    1 Pages

  4. WeConnect

    4 Pages

  5. PS-100

    3 Pages

  6. PS-30

    2 Pages

  7. MCI-211G

    3 Pages

  8. MCI-422

    3 Pages

  9. MCW-211

    2 Pages

  10. AD-01

    2 Pages

  11. IDW-90

    2 Pages

  12. WeOS

    1068 Pages

  13. L206-F2G

    2 Pages

  14. RFR-212-FB

    2 Pages

  15. RFI-211-T3G

    2 Pages

  16. DDW-142

    5 Pages

  17. sdi-550

    3 Pages

  18. sdi-541

    3 Pages

  19. 730-f1

    2 Pages

  20. westerm

    2 Pages

  21. MRD-350

    3 Pages

  22. MR-270

    3 Pages

  23. MR-210

    3 Pages

  24. MDW-45

    2 Pages

  25. TD-29P

    2 Pages

  26. LD-34

    2 Pages

  27. MM-14

    2 Pages

  28. LA-10

    2 Pages

  29. GDW-11 485

    2 Pages

  30. LD-63B

    2 Pages

  31. DDW-100

    2 Pages

  32. MD-21

    2 Pages

  33. MA-29

    2 Pages

  34. MA-21

    2 Pages

Archived catalogs

  1. PS-100

    3 Pages

  2. weconnect

    4 Pages

  3. MD-12 series

    2 Pages

  4. weconfig

    1 Pages

  5. Lynx

    20 Pages