Industrial ADSL/VDSL Router BRD-355A and BRD-355B • Industrial remote access using the Internet • MCT (SIN-498)-PASS and SoGEA compliant • Fixed line broadband connection via ADSL or VDSL2 • Support for ADSL Annex J and VDSL2 vectoring • Access SCADA systems, HMIs, sensors and PLCs remotely • Designed for industrial applications • 35 mm DIN-rail mounting • Wide power input range, 10 to 60 VDC • Wide operating temperature range (-25 to +70°C) • High MTBF MIL-217F 955.000 hours • Secured resilient Internet access • Cybersecurity toolbox including firewall, DoS prevention • Full integration with WeConnect Remote access solution • Legacy Serial to IP support • Replacement for analogue leased lines modems • Serial protocols to IP conversion MCT-Pass Remote access removes boundaries, eliminates the need for time consuming site visits and provides a network infrastructure suitable for today’s ”always on”-society. The BRD-355 industrial ADSL/VDSL router uses the Internet to connect remote networks. Allowing IP enabled SCADA, HMI, PLCs, sensors or legacy serial devices etc. to communicate with each other, a prerequisite for any Industrial Internet (IIoT/IoT) solution. The BRD-355 has a built-in two port Ethernet switch and an RS-232-port, for both new and legacy modem replacement. Designed to be installed on a DIN rail all connectors and LEDs have been positioned on the front of the unit, for easy access and fast status feedback. The cybersecurity features of the BRD-355 prevent unauthorized access and secure the communication for Internet-enabled applications. The easy-to-use firewall filters incoming and outgoing traffic, allowing only approved packets to pass through. The BRD supports a variety of VPN technologies to ensure that data can be sent over public or private networks securely via SSL (OpenVPN) or IPsec. The BRD-355 is fully integrated with the easy to use, Westermo WeConnect high security remote access solution. Upgrading legacy serial or modem systems to IP-enabled, can prove both costly and time consuming. Therefore the BRD-355 includes a wide set of feature to allow the easy migration of the legacy serial/modem applications. The features include interpreting the ATD modem emulation, lease line over IP and multidrop application where a master is connected to multiple slave locations. BRD-355AB_2303_EN_REV. C - SUBJECT TO CHANGE WITHOUT NOT

BRD-355AB_2303_EN_REV. C - SUBJECT TO CHANGE WITHOUT NOTICE. @ Westermo Network Technologies

xDSL protocols 3125-0150 PS-60, DIN-rail Power Supply BRD-355AB_2303_EN_REV. C - SUBJECT TO CHANGE WITHOUT

Specifications - BRD-355A and BRD-355B Protocols and Functionality Layer 2 Switching IEEE 802.1AB LLDP, IGMPv1/v2/v3 Snooping, MAC filters, independent port configuration Layer 2 QoS IEEE 802.1p Class of Service with flexible classification (VLAN tag priority IP DSCP/ToS, Port ID), Ingress and Egress Rate limiting IP Host Services Static IP Address, DHCP Client, DNS Client, DDNS, ZeroConf (mDNS), NTP Client (NTPv4), IP Interfaces (Ethernet, VLAN, Loopback, SSL, VPN, GRE) Network Servers DHCP Server (including options 1, 3, 6, 42), DHCP Relay Agent, DNS Proxy Server (DNS forwarder and Host records)...