- Catalogs
- Werner Electric GmbH
- Annunciator Windows
Annunciator Windows
Annunciator Windows
WERNER's 30 Series Annunciator Windows are designed for efficient integration of process indicators in limited panel spaces, offering clarity and cost-effectiveness. They exceed industry standards and are suitable for demanding industrial environments.
Key Features:
- Integrated 3-phase flasher and buzzer amplifier circuits with 68 Series Logic Controllers.
- Available with high-bright filament lamps and multi-chip LED designs in various voltages (6V, 12V, 24V, 110V, 220V AC/DC).
- Available in six colors as per IEC standards for different alarm conditions.
- Customizable window sizes, colors, and control logics.
- Pre-wired elements for reduced wiring time.
- Configuration supports up to 200 windows in one panel setup.
Technical Specifications:
- Operating Temperature: -20 to +65°C.
- Operating Humidity: 40 to 85% RH.
- Insulation Resistance: 100 mΩ minimum (500V DC).
- Dielectric Strength: 2,500V AC for 1 minute between live and dead parts.
- Degree of Protection: IP40.
LED Unit Specifications:
- Rated Voltage: 6V, 12V, 24V, 110V, 220V AC/DC with ±10% tolerance.
- Illumination Colors: Red, White, Yellow, Amber, Blue, Green.
- Current Ratings: Vary by color and voltage.
Model Number Structure:
The model number indicates series, number of rows and columns, lamp type, window size, voltage, and color.
Ordering Examples:
Examples provided for different configurations, including optional clear lenses.
Accessories & Instructions:
- Includes terminal covers, mounting clips, and jumpers.
- Instructions for terminal arrangements, window removal, and lens insertion.
Panel Cut-Out & Window Dimensions:
- Various window sizes (30x30, 30x60, 60x30, 60x60 mm) with corresponding panel cut-out dimensions.
- External dimensions and panel cut-out tolerances provided.
Specifications and Recommendations:
- Ensure adequate side panel thickness to support the weight of units and wires.
- Maintain DC power voltage within specified range for LED brightness and longevity.
- Limit simultaneous lighting of all lamps; a lamp test is possible for up to 45 minutes.
- Limit converter units to 50 to prevent excessive heat.
- Turn off power before removing the LED unit.
- Ventilation is recommended for continuous use of more than ten lamps.
- Fewer windows are recommended with multiple lamp holders.
- Lens removal is possible with a screwdriver.
Standards and Compliance:
- WERNER is not responsible for conformity with codes or standards.
- Third-party certification documents available upon request.
- Products should not be used in high-risk applications without proper rating and installation.
Application Considerations:
- WERNER may change type/model numbers and specifications without notice.
- Consult with a WERNER representative for confirmation.
Disclaimers:
- WERNER is not responsible for clerical, typographical, or proofreading errors.
- All marks and symbols in catalogues belong to respective owners.
Warranty:
- Products are warranted to be free from defects for one year.
- WERNER is not responsible for special, indirect, or consequential damages.
- Warranty claims require confirmation of proper storage, installation, and maintenance.
Terms and Conditions:
- Product specifications are subject to change without notice.
- Consult a WERNER representative for clarifications.
Contact Information:
- Werner Electric India (P) Ltd., No. 38, Hunsur Road, Mysore 570012.
- Phone: +91 821-425 4500, Fax: +91 821-425 4599
- Email: [email protected]
- Website: www.wernerelectric.de
Catalog excerpts
Annunciator Windows
Open the catalog to page 1
30 series Annunciator Windows
Open the catalog to page 2
WERNER'S 30 Series Annunciator Windows are the solution of choice if it is your task to fit of large number of process indicators into limited panel space. Using our 30 Series products will provide you with perfect process clarity in the daily operation of your panels with a very space and cost saving solution. Features Overview □ Integrated 3-phase flasher circuits when used with our 68 Series Logic Controllers □ Integrated buzzer amplifier circuits when used with our 68 Series Logic Controllers □ Standard fitted with high bright filament lamps in AC or DC 6V, 12V & 24V □ Available in 6 Colors...
Open the catalog to page 3
30 series Annunciator Windows Inventing Innovation... Provide a bright & colorful display surface Different options of size, color & control logics Filament lamps in 6V, 12V & 24V AC/DC. Noise immunity and reliability oriented design environment resistance Built in Three-phase flasher, buzzer amplifier circuit Approbations and Declaration of conformity ' Please choose the appropriate color code In "Illumination color" section. tion Instructi Frame Weight Housing Weight Display Panel 30 series Annunciator Windows
Open the catalog to page 4
30 series Annunciator Windows Inventing Innovation... Lens Specifications The insulated jumpers prevent electric shocks and reduce wiring time. LED: 10 rows by 26 columns maximum Filament: 10 rows by 20 columns maximum Filament illumination: 6, 12, 24V AC/DC illumination face sizes Frame (metal) window types. Base Lamp ' Choose the appropriate current voltage (Page no. 9). □ Choose the appropriate LED Color (Page no. 9). 30 series Annunciator Windows
Open the catalog to page 5
30 series Annunciator Windows Inventing Innovation... inaow size 1. The above tables dimensions are for window size 30x30 2. The cut out for other window sizes can be read from the same table by converting the number of row & colors into type 33 (30x30) equivalents. 3. The number of windows equals rows multiplied by columns. For example, for 4 rows by 5 columns, the number of windows is 20, external dimensions are 132mm height by 162mm width and panel cut out is 125mm height by 155mm width. 4. External dimensions are represented by A for rows and B for columns. 5. Panel cut-out dimensions are...
Open the catalog to page 6
30 series Annunciator Windows Inventing Innovation... 30 series Annunciator Windows
Open the catalog to page 7
30 series Annunciator Windows Illumination type 1.1- Specify the no. of rows & columns followed by current voltage 1.3- Choose the appropriate color based on the windows 1.2- Mention the window size as your requirements 1.4- Specify similar no. of windows according to the color & size Illumination type • 2.1- Follow the Ordering example 1 from step 1 to 4 and specify "C" for optional clear lens. Clear Lens Illumination type 3.1- Follow the Ordering example 1 from step 1 to 4 and specify "C" for optional clear lens. 30 series Annunciator Windows
Open the catalog to page 8
30 series Annunciator Windows C indicates Clear Lens C indicates Clear Lens 30 series Annunciator Windows
Open the catalog to page 9
30 series Annunciator Windows using mounting clips 30 series Annunciator Windows
Open the catalog to page 10
30 series Annunciator Windows Inventing Innovation... 30 series Annunciator Windows
Open the catalog to page 11
30 series Annunciator Windows Inventing Innovation... 30 series Annunciator Windows
Open the catalog to page 12
30 series Annunciator Windows Inventing Innovation... Removing Windows Insert the tip of a small screwdriver into the slot under the lens frame and gently press down on the screwdriver. Removing Lens, Color Screen, and Marking Plate Push open the lens frame with both hands. To remove them from the lens frame, to remove the lens, color screen, and marking plate from the lens frame. The lens can also be removed by inserting a screwdriver into one of the sides. 1. Mount the LED Unit or Filament to the lamp holder 2. Place the marking plate, color screen and lens respectively in to the Lens frame....
Open the catalog to page 13
30 series Annunciator Windows Please read this catalog before purchasing any products. Please consult your WERNER representative for any clarifications or WERNER shall not be responsible for conformity with any regulations, codes or standards that apply to use of the products. WERNER shall provide applicable third party certification documents identifying ratings and limitations of use that apply to the products in case of the customer's request. Prevent use of the products for an application involving risk to life or property. Be sure that the WERNER'S products are properly rated and installed...
Open the catalog to page 14
Werner Electric India (P) Ltd.
Open the catalog to page 15All Werner Electric GmbH catalogs and technical brochures
90 Series Mosaic27 Pages
70-75 Series Sockets22 Pages
65 Series SMPS27 Pages
31 Series Stack Lights16 Pages
26 Series PC Board Relays13 Pages
24 Series Ultra Slim Relays11 Pages
23 Series Power Relays15 Pages
22 Series Relays12 Pages
21 Series General Purpose Relays19 Pages
290 Series PCB Power Relays7 Pages
General Purpose Contactors 5326 Pages
Annunciator Windows 30 Series17 Pages
46 Series Foot Switches10 Pages
9000 Series Mosaic24 Pages
45 Series Catalogue35 Pages
LED Light Bar11 Pages
Annunciator Logic Controller13 Pages
Contactors26 Pages
MCB16 Pages
Miniature Limit Switch15 Pages
Foot Switches10 Pages
General Purpose Limit Switches16 Pages
Miniature LED Indicators11 Pages
PC Board Relays - 25 Series11 Pages
20 Series - Power Relays19 Pages
Capacitive Sensors31 Pages
Photoelectric Sensors50 Pages
Inductive Sensors144 Pages
- Power supply unit
- DC power supply
- AC/DC power supply
- Single-pole switch
- Junction block
- Single-output power supply
- Push-button switch
- Switching relay
- Technology switch
- Circuit breaker
- Wireless remote control
- Remote control with buttons
- Power supply with overload protection
- Compact power supply
- Multipole switch
- Screw connection terminal block
- DIN rail power supply
- Programmable logic controller
- Electromechanical switch
- Control pedal