*mydirectindustry

Catalogs
Werner Electric GmbH
26 Series PC Board Relays

26 Series PC Board Relays

Product catalog summary

Specifications:
The 26 Series PC Board Relays by WERNER are designed for applications requiring SPDT or DPDT capabilities with limited board space. These relays are not sealed, making them a cost-effective choice. They are suitable for direct PC board mounting, PCB socket, or panel socket mounting, and are available in SPDT, DPDT, SPST-NO, and DPST-NO configurations. They support both 50 Hz and 60 Hz cycles and offer a dielectric strength of 5,000V AC.

Technical Data:
The relays are available in standard current ratings from 6V to 48V DC, with SPST models supporting up to 12 Ampere continuous load current and SPDT models up to 8 Ampere. They are designed with MFMS principles for maximum function in minimal space.

Model Number Structure:
The model numbers are structured to indicate the type of relay (SPDT, DPDT, etc.), voltage, and terminal type. For example, model 26.21.01.006 represents an SPDT relay with a 6V AC coil.

Dimensions:
The relays have compact dimensions, with a maximum height of 25mm, making them suitable for space-constrained applications.

Accessories:
Accessories include DIN rails and mounting clips suitable for all WERNER 26 Series relays. The relays can be mounted on DIN rails or PCB mounts with spring clamps or finger-safe terminals.

Safety Precautions:
Users are advised to avoid dropping or shocking the relays and to use them in environments free from dust and corrosive gases. Proper coil voltage and terminal screw torque must be maintained to prevent electrical hazards.

Application Considerations:
WERNER advises consulting with representatives to confirm product specifications and warns against using the relays in life-critical applications without proper rating and installation.

Warranty and Disclaimers:
WERNER offers a one-year warranty against defects in materials and workmanship. The company is not responsible for damages resulting from improper use or installation.

Catalog excerpts

PRODUCT SPECIFICATION

Open the catalog to page 1

26 Series PC Board Relays

Open the catalog to page 2

26 Series PC Board Relays PC Board Relays WERNER`s 26 Series PC Board Relays are the product of your choice if your designs require SPDT or even DPDT abilities but board space and available heights in your casings is very limited. Like our 24 Series, the 25 Series products are fully sealed for use in harsh surroundings, whilst the 26 series products are not sealed but therefore your right choice when purchase price is the major issue. Features Overview All models available for direct PC Board Mounting, PCB socket or Panel socket mounting All models designed applying MFMS design principles (Max...

Open the catalog to page 3

Series PC Board RelaysPC Board Relays Features: PC Board Relays Dielectric strength of 5,000V AC Compact and small Contact Capacity of 8A &12A SPDT, DPDT, SPST-NO & DPST-NO Approbations and Declaration of conformity OVerVOltage category

Open the catalog to page 4

Series PC Board RelaysSpecifications Operating Temperature

Open the catalog to page 5

Model Number Structure - PC Board Relays

Open the catalog to page 6

26 Series PC Board Relays Model Number Selection Appearance

Open the catalog to page 7

Series PC Board Relays

Open the catalog to page 8

26 Series PC Board Relays Dimensions 26.24(DPST-NO) Internal Connection (Bottom View) DPDT

Open the catalog to page 9

Mounting Clips Applicable Clips

Open the catalog to page 10

Protection When an inrush current flows through the load, the contact may become welded. The contact ratings show maximum values, Make sure that these values are not exceeded. Contact a contact protection circuit, such as a current limiting resistor as a optional solution. Power HHV^||nd Lj^j| This protection circuit can be used when the load impedance is smaller than the RC impedance in an AC load power circuit. R: Resistor of approximately the same resistance value as the load C: 0.1 to 1 ^F This protection circuit can be used for both AC and DC load power circuits. R: Resistor of approximately...

Open the catalog to page 11

26 Series PC Board Relays Terms And Conditions Please read this catalog before purchasing any products. Please consult your WERNER representative for any clarifications or comments. Application Considerations WERNER shall not be responsible for conformity with any regulations, codes or standards that apply to use of the products. WERNER shall provide applicable third party certification documents identifying ratings and limitations of use that apply to the products in case of the customer's request. Prevent use the products for an application involving risk to life or property. Be sure that the...

Open the catalog to page 12

Werner Elektrik GmbH Dorotheastraße, 2, 27568 Bremerhaven, Germany T: +49 711 - 6740 0552

Open the catalog to page 13

All Werner Electric GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list