Werkzeugbau Engl GmbH Riegelweg 11 D-93164 Laaber eMail: [email protected] With the panel separator NTE-350 S, pre-scored PCB panels can be separated gently and without bending stress for the circuit board and components. The cutting process takes place evenly and in parallel over the entire length. The electromechanical drive guarantees a constant cutting speed. The mold opening can be set quickly and reproducibly using a preset rotary switch. A change in the mold opening can be carried out precisely and in a matter of seconds.. Technical specifications: Drive Option: Separation.-: length: Tool opening 16 times reproducible from 0.4 to 1.5 mm. Leakage resistance 106 bis 8x106 Ohm with earthing system. Table frame: 1500 mm (option: 1200 mm) wide, 750 mm deep, 810 mm high. Scope of delivery The complete scope of the ready-to-connect machine includes: ESD-compliant table top, earthed footrest with integrated foot switch, a connection box for the earthing bracelet, as well as 2 sets of cutting tools, optionally Form A to E. Tools forms. Designation of the tools: 1 set tool for the machine NTE-350 S with the form "E" = 1 set cutting tool Wkzg350/E For boards with a thickness 1 mm or smaller, add the suffix "005". = 1 set cutting tool Wkzg350/E/005 Special shapes on request Geschäftsführer Oliver Engl Adresse Riegelweg 11, 93164 Laaber eMail: Telefon: [email protected] 09498 8104