Torque Tools for controlled tightening
28Pages

Tools. From Ideas. Torque Tools

Wera Torque Tools Wera torque tools permit torque-controlled tightening to prevent damage to screws or work pieces and to ensure the dependability of the screw connection. This makes labour-intensive drilling-out of the screw and unproductive downtimes a thing of the past. Also important whenever repeat accuracy is needed. Includes the ergonomic Kraftform handle that clicks audibly and noticeably when the desired torque is reached. No complex exchange blades. Instead of special blades, normal bits as per C 6.3 and E 6.3 or even ¼" sockets can be used. Adjustable torque screwdrivers Can be...

Pre-set torque screwdrivers Pre-set torque, page 16. Suitable for applications requiring a non-adjustable and a tamperproof torque blade assembly, page 22.

Adjustable Kraftform Torque Screwdrivers Wera’s adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics.

For more information, please scan the QR Code shown below. Simple setting of the required torque by hand. Easy-to-read scale value. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. Unlimited manually by hand-transferable torque for loosening seized screws. Measurement accuracy is ± 6 % in accordance with the standard EN ISO 6789. Distinctly audible and noticeable excess-load signal when the preset torque is reached. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. All Wera...

Kraftform Torque Screwdrivers Variable torque adjustment models Series 7400 Kraftform adjustable torque screwdrivers (0.10-3.0 Nm) with Rapidaptor quick-release chuck Series 7400 Kraftform adjustable torque screwdrivers (2.5-29.0 in. lbs.) with Rapidaptor quick-release chuck RAPIDAPTOR TECHNOLOGY RAPIDAPTOR TECHNOLOGY Application: Suitable for 1/4“ DIN 3126-C 6.3 and E 6.3 (ISO 1173) hexagon insert bits and Wera Series 1 and 4 Application: Suitable for 1/4“ DIN 3126-C 6.3 and E 6.3 (ISO 1173) hexagon insert bits and Wera Series 1 and 4 Design: Rapidaptor rapid-in, rapid-out, rapid-spin,...

Attachable magnifying glass Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. 7440/41 Kraftform torque screwdriver set 0.3-3.0 Nm RAPIDAPTOR TECHNOLOGY Bit holder Rapidaptor Rapid-in und self-lock The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Rapid-out Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks...

Kraftform Torque Screwdrivers Variable torque adjustment models 7443/61/9 Assembly set for tyre pressure control systems RAPIDAPTOR TECHNOLOGY 1) Other pre-set values within the adjustable range can be delivered on request Kraftform Kompakt 60 Torque 1.2 - 3.0 Nm Why does Wera manufacture adjustable Kraftform torque screwdrivers? Many screws – particularly in assembly and maintenance applications – have to be tightened with controlled torque to ensure the dependability of the screw connection and/or to avoid damage to the screw or work piece. Wera’s adjustable torque screwdrivers are the...

Kraftform Torque Screwdrivers ESD Variable torque adjustment models Kraftform Torque Screwdrivers ESD The requirements for ESD-safe screwdrivers are specified in the European standard EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is < 109 ohm. This securely protects components against electrostatic energy and associated damage. Series 7400...

Series 7400 Kraftform ESD adjustable torque screwdrivers (0.1-1.0 Nm) with quick-release chuck 1430 Kraftform Micro ESD adjustable torque screwdrivers (0,02-0,11 Nm) with quick-release chuck FAST SPINNING ZONE POWER ZONE PRECISION ZONE NEW Application: Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design: With quick-release chuck for rapid bit change ± 10% Kraftform Micro with non-roll feature and rotating cap, multicomponent With quick-release chuck for rapid bit change Accuracy: Handle: Application: Suitable for bits with 4 mm...

Kraftform Torque Screwdrivers VDE Variable torque adjustment models Series 7400 VDE Kraftform adjustable torque handle (1.2–3.0 Nm) Kraftform Kompakt VDE Torque 1.2–3.0 Nm Application: For Wera interchangeable Kraftform Kompakt VDE blades only Accuracy: Handle: 1 Series 7400 VDE Kraftform adjustable torque handle (1.2 - 3.0 Nm) for Wera VDE interchangeable blades only VDE interchangeable blades (each 154 mm long) with reduced blade diameter (articles KK 60 i 0,4x2,5 and KK 67 i TX 10 conventional diameter) with integrated protective insulation, allows sunken screws and spring elements to be...

lectric strength under a 10,000 volt Each Kraftform Kompakt VDE set has load in a water bath to make sure been tested individually in a water that their most important property, bath at 10,000 volts, in accordance their insulation, has been exhaus- The handle/interchangeable blade with DIN EN 60900 (IEC 60900). This tively tested. Each individual Wera system allows rapid exchange of the ten-times-higher testing load guar- VDE screwdriver is subjected to this blades required for a wide range of antees safe working at their maxi- test to guarantee safe working up to applications. mum...

Pre-set Kraftform torque screwdrivers These tools are ideal for all applications where a constant, identical torque is required and where a high degree of repeat accuracy is needed.