Tools. From Ideas.

Joker Ratcheting combination wrenches Hexagonal nuts or bolts Ratcheting combination wrench; unique holding function, thanks to the metal plate in the jaw, reduces the risk of dropping nuts and bolts; replaceable metal plate in the jaw secures nuts and bolts with its extra hard teeth and reduces the danger of slipping; integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied; double-hex geometry makes for a positive connection with nuts or bolts and reduces the risk of slipping; return angle of only 30° at the open end to avoid time consuming flipping...

28 bits; 1 870/1 socket adaptor (VA" hexagonal to VA" square); 7 manual & power tool sockets; 1 Rapidaptor bit holder; 1 Wera Bit Ratchet, with drop-forged steel design suitable for the fi tting of bits with VA" hexagonal headed drive as per DIN 3126-C 6.3 and E 6.3 (ISO 1173), i.e. Wera Series 1 and 4. Can also be used with VA" sockets by using the socket adaptor (870/1). Sockets for both manual & machine work and bits in

867/1 IMP DC Impaktor TORX® bits TORX® socket screws 1/4" hexagon, suitable for DIN 3126-D6.3, ISO 1173 bit holders The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance

1 Impaktor holder with retaining ring and ring magnet in the chuck for a secure fit of the bits in the holder, 9 Impaktor bits. The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers. Holder equipped with a ring magnet to easily hold longer and heavier screws, also ideal for above-head work. The rough diamond coating of the bits reduces the danger of any slipping out of the screw head due to the enhanced...

1 Universal Bit Holder 895/4/1 K with quick-release chuck suitable for power tools Bits with torsion zone and -Torsion zone absorbs peak torque loads, - Diamond-coating reduces the risk of slipping; minute diamond particles literally bite into

1 Kraftform hand-held bit holder 817 VDE forWera VDE interchangeable blades VDE interchangeable blades (each 154 mm long) with reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be Single-pole voltage tester "Extra slim": Ultra slim insulated blades allow recessed screws and spring clamps to be accessed easily. Blades individually tested as per

KOLOSS All Inclusive Set with 1/2" drive Ratchet function for 1/2" square sockets and 1/2" adaptors with square drive, equipped with ball lock, hammer function e.g. to align work pieces Push-through square drive for forward and reverse operation, fine-tooth ratchet mechanism, small return angle of 6°, can transfer at least 600 Nm of torque, tubular shaft to minimise impact vibrations, drop-forged hammer head, positively pinned, ground striking face Multi-component Kraftform handle for optimum pressure, impact and tensile loads, handle end designed for connection of KOLOSS extension 8780 C and...

New in 2012 Bit-Safe Classic 8 31 pieces 1 universal bit holder 899/4/1 K suitable for power tools and electronic drills Code 05057908001 899/4/1 K 867/1 Z TORX® 1 x 1/4"x50 3 x TX 10x25; 5 x TX 15x25; 8 x TX 20x25; 8 x TX 25x25; 4 x TX 30x25; 2 x TX 40x25 10 9

1 universal bit holder 899/4/1 K suitable for power tools and electronic drills 1 universal bit holder 899/4/1 K suitable for power tools and electronic drills