wM-Bus / OMS repeater CRANE
1Pages

wM-Bus / OMS repeater CRANE Product description The line-operated (230V) CRANE serves as a repeater for any wMBus device according to EN 13757-4. With the help of the repeater, it is possible to increase the range of wM-Bus devices. The forwarding of the telegrams from devices (e.g. meters) takes place permanently, which means no caching takes place. Telegrams with regard to the status of the repeater are sent within a settable time interval of 0 - 15 minutes. According to the OMS specification, only one hop is allowed between wM-Bus devices and a gateway. The repeater supports the modes S, T and C and can receive in one mode and forward in another mode. The legally prescribed duty cycle in the 868 MHz frequency range is checked by the repeater and independently maintained. The number of wM-Bus devices and the transmission frequency per hour determines the Duty-Cycle. If it is exhausted, further telegrams received in this hour are rejected and not saved. Android Application The device is configured via NFC interface. For this purpose, WEPTECH provides an Android application. Temperature: +5°C bis +35°C Humidity: 0% bis 70% Line-operated (230V) Wall mounting Internal antenna Weight < 150g Ideal for Smart Metering Firmware update via NFC Parameter setting via NFC S-, C- and T-mode Easy mounting with mounting plate and clip-on-cover The app can be obtained here or is available on request: https://play.google.com/store/apps/details?id=de.weptech.nfcconfigurator WEPTECH elektronik GmbH WEPTECH elektronik GmbH reserves the right to make changes to technical specifications or functions of the product without any notice. WEPTECH elektronik GmbH does not assume any responsibility for the use of the described products. All trademarks , registered trademarks and product names are the proper