Thread & BLE module SPARROW
1Pages

Thread & BLE module SPARROW Product description This module features aNXP stack KW41Z forNXP’s ThreadBLE and runs on module uses the KW41Z SoC that runs Thread and and BLE stack to provide secure IPv6-based protocol to communicate on a local network. an IPv6-based networkingnetworking over a local wireless mesh wireless Thread uses 6LoWPAN, uses in turn uses the IEEE 802.15.4 wireless mesh network. Thread which6LoWPAN, which uses the IEEE 802.15.4 protocol,protocol with mesh communication. It is IP-adressable with wireless and pairs these well-established mesh communication technologies with AES encryption. SPARROW is routing algorithm. The 250 cloud access and AES encryption and a resilient able to support up to stack is able to support up to 250is simplein one local network. It is simple devices in one local network. It devices to set up and it provides to set upat the network security at the network BLE module includes a security and it provides layer. The Thread and layer. SPARROW includes an on board chip a ceramic antenna and is supplied with a development shielding cover, antenna and is supplied with a development board. An external antenna can be connected to the antenna pad. board . An external antenna can be connected to the antenna pad. Software development kit provided by NXP includes:   Certified Thread & BLE wireless stacks OS abstraction layer to run your application on FreeRTOS, FREERTOS, uCOSII or bare metal Modularized framework for common functionality Expansive set of hardware drivers Additional middleware for File system access, USB, other wireless file System access, USB, other Wireless protocols etc. Dimensions and Pin-Out Pinout Features: Features  Simple usage & power efficient  AES-encryption mode  Simple usage 802.15.4  Standard IEEE  Available as Dual Mode  Robust mesh network  (KW41Z) or Thread Only Open IPv6-based protocol  (KW21Z)climate control, Ideal for module  Power efficient energy management, home  AES-encryption mode automation 2.4 GHz ISM band  Standard IEEE 802.15.4 ARM® Cortex-M0+ core  Robust mesh network Low power UART  Open IPv6-based protocol  Ideal for acclimated devices SPARROW802.15.4 compliant  IEEE Gold  Dual-mode-module providing  2.4 GHz ISM band  Thread &Cortex-M0+ core @32 ARM® BLE (KW41Z) SPARROWon-module reference MHz Grey  Thread-only-module using the oscillator crystal NXP KW21Z  Low power UART  Up to 25 GPIOs WEPTECH elektronik GmbH WEPTECH elektronik GmbH reserves the right to make changes to technical specifications or functions of the product without any notice. WEPTECH elektronik GmbH does not assume any responsibility for the use of the described products. All trademarks , registered trademarks