1. Catalogs
  2. Wenzhou Tripod Instrument Manufacturing Co.,Ltd.
  3. SF digital force gauge dynamometer for testing pull or push load test

SF digital force gauge dynamometer for testing pull or push load test

SF digital force gauge dynamometer for testing pull or push load test

SF digital force gauge dynamometer for testing pull or push load test

Product catalog summary
Introduction
This document provides technical specifications and characteristics of the SF Digital Force Gauge manufactured by Wenzhou Tripod Instrument Manufacturing Co., Ltd.

Product Usage
The SF Digital Force Gauge is a high-performance, simple push-pull force gauge designed for ease of use.

Characteristics
  • Features a digital display for easy reading.
  • Lightweight and compact, making it easy to carry.
  • Displays units in Lb, Kg, and N.
  • Equipped with a 3.7V lithium battery that includes overload protection to prevent short circuits and electricity leakage. It also indicates low battery and automatically shuts off after 10 minutes of inactivity.

Main Technical Parameters
  • Models available: SF-2, SF-3, SF-5, SF-10, SF-20, SF-30, SF-50, SF-100, SF-200, SF-300, SF-500.
  • Maximum load values range from 2N to 500N, with equivalent values in Kg and Lb.
  • Load value precision: 0.001N, 0.01N, 0.1N; 0.001KG, 0.01KG; 0.001Lb, 0.01Lb.
  • Sensor: Internal sensor with a precision of ±0.5%.
  • Power: 3.7V lithium battery with a charging time of 4-6 hours and a continuous usage time of approximately 15 hours. Battery life exceeds 300 cycles.
  • Charger specifications: Input AC100-240V 50-60Hz, Output DC 5V 1000mA.
  • Operating temperature: 5℃ to 35℃.
  • Transportation temperature: -10℃ to 60℃.
  • Relative humidity: 15% to 80% RH.
  • Working environment: Non-corrosive and no focus required.

Contact Information
Wenzhou Tripod Instrument Manufacturing Co., Ltd
Address: Liushi Town, Wenzhou City, Zhejiang Province, China
Email: [email protected]
Tel: 86-577-57572515, 86-577-57570095
See more

Catalog excerpts

SF digital force gauge dynamometer for testing pull or push load test-1

SF Digital Force Gauge This product is a simple push pull force gauge with high 2.In light weight,small size,easy to carry; protection in case of short j_ electricity .It also can tell running low.lt adopt the auto shut off with no measuring mode Wenzhou Tripod Instrument Manufacturing Co.,Ltd ADD:Liushi Town,Wenzhou City,Zhejiang Province,China Email :fiona@tri podinstrument.com

 Open the catalog to page 1
SF digital force gauge dynamometer for testing pull or push load test-2

Three:Main technical parameters Model Load value Load Value Sensor inside Charging time Continuous usage time of battery Battery life Charger Transporta tion temperatur e Relative humidity No focus ,Non-corrosive in surroundings Wenzhou Tripod Instrument Manufacturing Co.,Ltd ADD:Liushi Town,Wenzhou City,Zhejiang Province,China Email:[email protected] TEL:86-577-57572515 86-577-57570095

 Open the catalog to page 2
SF digital force gauge dynamometer for testing pull or push load test-3

Force gauge Wenzhou Tripod Instrument Manufacturing Co.,Ltd ADD:Liushi Town,Wenzhou City,Zhejiang Province,China Email:[email protected] TEL:86-577-57572515 86-577-57570095

 Open the catalog to page 3

All Wenzhou Tripod Instrument Manufacturing Co.,Ltd. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.