LX Shore Hardness Tester | Wenzhou Tripod instrument

Product catalog summary

Introduction:
The Shore Hardness Tester (LX) is designed to measure the hardness of various materials. It is available in three types: Type A, Type C, and Type D. Each type is suited for different materials:

Type A: Suitable for general rubber, synthetic rubber, vulcanized rubber, soft rubber, leather, and wax.
Type C: Suitable for testing the hardness of rubber microporous materials.
Type D: Suitable for hard rubber, hard resin, acrylic, glass, cushiony plastic cement, printing plates, and fiber.

Major Performances:
The Shaw rubber hardness gauge is used to measure the hardness of vulcanized rubber and plastic products. It is available in three models: Type A, Type C, and Type D, each with single and double pointer options.

Type A and D: Used for testing low to medium and high-hardness materials, respectively.
Type C: Used for testing microporous materials, such as those used in shoe manufacturing, with a compression rate of 50%, stress of 0.049 MPa or above. These materials are made of rubber plastic with blisters in plastic.

This hardness gauge complies with the standards GB/T531-99, GB2411-80, hg/t2489-93, and JJG304-2003.

Catalog excerpts

LX Shore Hardness Tester | Wenzhou Tripod instrument-1

Shore Hardness Tester(LX) Introduction: Ty pe A: applicable to gener al rubber, synthet ic rubber, vulcanized rubber, soft rubber, leat her, wax, et c. Ty pe C: applicable to the har dness test of rubber micr oporous mat er ial. Ty pe D: applicable to har d rubber, har d resin, ac rylic, glass, cushiony plast ic cem ent, pr inting plat es, fiber, et c. Major performances : Shaw rubber har dness gauge is an appar at us to measure vulcanized rubber and plast ic pr oducts . This appar atus has thr ee models of Type A, Ty pe C and Type D, and each model is subdivided int o tw o types of single point er and double point er . Type A and D respect ively ar e applicable to the test ing of low and medium har dness, and high- hardness mat erials. Type C applies to the test ing of micr oporous mater ial which is us ed to make shoes, with compression rate 50 per cent, str ess 0. 049 MPa or abov e, and this kind of mater ial is made of rubber plast ic and has blister in plast ic . This har dness gauge conf or ms to the regulat ions of GB /T 531-99, GB 2411-80, hg/ t 2489-93, JJG 304-2003.

Open the catalog to page 1