ANH Digital Torsion Spring Tester is used for testing and inspection of torsion spring | Wenzhou Tripod instrument

Product catalog summary

Introduction:
The ANH series digital torsion spring tester is an advanced, multi-functional instrument designed for testing and inspecting torsion springs. It is characterized by its simple operation, high precision, portability, and comprehensive functionality. This tester is widely applicable in various sectors including electronics, light industry, machinery manufacturing, and research institutions.

Torsion Spring Torque Test Procedures:

Select the appropriate central spindle based on test requirements and install it into the mounting holes on the measuring plate. Secure the tested spring to the central spindle using the locating slot, slot corner block, and press block to ensure the fixed end is stable.
Adjust the fork on the testing machine's stand column to make contact with the other end of the torsional spring. Upon connection, reset the force and angle values simultaneously.
The LCD panel will display zero for both torque and angle values.
Rotate the measured handle evenly according to the torsion spring measurement requirements to display the technical parameters of the torsional spring.
Repeat the procedure to verify the technical parameters of the torsional spring.

Key Components:

Central Spindle
Stand Column
Fork
Locating Slot of Measuring Plate

Catalog excerpts

ANH Digital Torsion Spring Tester is used for testing and inspection of torsion spring | Wenzhou Tripod instrument-1

Digital Torsion Spring Tester (ANH) Introduction: The ANH series digital torsion spring tester is a kind of intelligent multi-functional measuring instrument used for testing and inspection of torsion spring. With simple operation, high precision, easy to carry, complete functions, widely used in all kinds of electric, light industry, machinery manufacturing, research institutions, etc. Torsion spring torque test procedures: According to test requirements, choose the suitable central spindle, install the central spindle to the mounting holes in measuring plate, then install the tested spring to central spindle, through the locating slot and slot corner block, press block etc to fix the fixed end steadily. Stand column Central spindle Fork locating slot of measuring Adjust the fork in testing machine stand column, make it contacts to the other end of torsional spring, by the time of connecting, force value and angle value reset at the same time. LCD panel show the torque value and angle value of zero. According to torsion spring measure requirement, rotate the measured handle egualmente, then can show the measured technical parameters of the torsional spring. Repeat the above operation can verify the technical parameters of the torsional spring.

Open the catalog to page 1