*mydirectindustry

Catalogs
Wenzhou Sanhe Measuring Instrument Co., Ltd
SHAHE|Digital Torsion Spring Tester|SNT series

SHAHE|Digital Torsion Spring Tester|SNT series

1 / 1 PageView full catalog

SHAHE|Digital Torsion Spring Tester|SNT series

Product catalog summary

Characteristics

High Resolution and Accuracy: Precision grade 1 with a minimum reading of 0.01 mN’m.
Display: Large screen measuring 100mm by 35mm with three display modes: real-time, automatic peak, and peak.
Units: Supports N’m, kg’cm, and lbf’in.
Peak Hold Function: Captures the peak during tests.
Deviation Limits: Upper and lower deviation limits can be set, with red and green alarm indicators and a buzzer.
Automatic Peak Function: Peak hold time can be set between 1 to 99 seconds.
Automatic Shutdown: Device shuts down automatically after 0 to 99 minutes of inactivity (0 seconds means no automatic shutdown).
Calculating Function: When connected to a computer, it automatically calculates maximum, minimum, and average values for each test.
Built-in Printer: Can print 99 groups of test data storage along with maximum, minimum, and average values.

Technical Data

Part Numbers and Capacities: Ranges from SNT-500A with 500 mN.m to SNT-20 with 20 N.m.
Resolution: Varies from 0.01 mN.m to 0.001 N.m depending on the model.
Test Range: 0-9999.9° with an angular resolution of 0.1°.
Accuracy: ±1%.
Measurement: Less than 80mm.
Torque: 100.
Loading Mode: Manual.
Size: 450mm x 220mm x 260mm.
Voltage: AC 220V, 50Hz.

Catalog excerpts

SHAHE|Digital Torsion Spring Tester|SNT series-1

Digital Torsion Spring Tester Characteristic 1.high resolution and high accuracy: precision grade 1, the minimum reading up to 0.01mN’m 2.Large screen display: length 100mm, width 35mm 3.Three display modes are available: real-time, automatic peak, peak 4.Three units:N’m, kg’cm, lbf’in 5.Peak hold function: can catch the peak in the test 6. Function : freely set on upper and lower deviation limit, the alarm indicator displays red and green respectively and buzzer alarms 7. Automatic perak function: freely set on peak hold time (1~99 seconds) 8. Automatic shutdowm function: 0~99 minutes no operation automtic shutdown (0 seconds no automatic shutdown) 9. Calculating fucntion: connected to the computer, automatic calculation the maxximum, minimum and average value in every test 10. Bulit-in printer can print 99 groups test data sotrage and maximum, minimum and average value. Technical Data Angular resolution Loading mode

Open the catalog to page 1

All Wenzhou Sanhe Measuring Instrument Co., Ltd catalogs and technical brochures

Archived catalogs

SHAHE|Digital Spring Extension And Compression Tester |ST series
1 Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list