- Catalogs
- Wenzhou Sanhe Measuring Instrument Co., Ltd
- SHAHE|Digital Bottle Cap Torque Meater|SP-P/SP-WPseries|1N.m,2N.m,3N.m,5N.m,10N.m,20N.m
- Products
- Catalogs
- News & Trends
- Exhibitions
SHAHE|Digital Bottle Cap Torque Meater|SP-P/SP-WPseries|1N.m,2N.m,3N.m,5N.m,10N.m,20N.m
1 / 1 PageView full catalog
SHAHE|Digital Bottle Cap Torque Meater|SP-P/SP-WPseries|1N.m,2N.m,3N.m,5N.m,10N.m,20N.m
Product catalog summary
Overview: The digital cap torque tester SP series is a sophisticated, multi-functional instrument designed to measure and inspect the opening and closing torque of various bottle caps. It is primarily used for testing the torque and calibration tightening force of caps, lamp holders, and parts in destructive torque tests. The instrument is available in two variants: with a printer and without a printer.
Technical Specifications:
- Models: Available with printer (SP-P series) and without printer (SP-WP series).
- Capacity: Ranges from 1 N.m to 20 N.m.
- Resolution: 0.0001 N.m to 0.001 N.m.
- Clamping Range: 25-194 mm, with a smaller range of 8-25 mm.
- Sensor Structure: Built-in type.
- Accuracy: ±1%.
- Power Supply: 8.4V 1.2V*7 NI-MH battery pack.
- Charging Time: 4-6 hours.
- Battery Usage Time: Approximately 10 hours.
- Battery Life: More than 300 charge cycles.
- Charger Specifications: Input: AC 220V 50Hz, Output: DC 10V 300 mA.
- Weight: Approximately 12 kg.
See more
Catalog excerpts
Digital Bottle Cap Torque Meater Characteristic: digital cap torque tester SP series is an intelligent multi-functional measuring instrument, specially designed to test and inspect various bottle caps opening and closing torque, which is mainly used for the opening and closing torque and calibration tightening force of all kinds of caps, lamp holders and parts torque destructive test. The instrument has two types: with and without printer types. Technical Data Part no. Capacity(N.m) Resolution(N.m) 25-194 A small clamping rang 8-25 Charging time Battery life
Open the catalog to page 1All Wenzhou Sanhe Measuring Instrument Co., Ltd catalogs and technical brochures
Archived catalogs
Related Searches
- Test stand
- Indentation hardness tester
- Digital indicator
- Panel panel meter
- Tilt sensor
- Digital display hardness tester
- Thickness gauge
- Micrometer
- Portable thickness gauge
- Digital inclination sensor
- Crane scale
- 2-axis tilt sensor
- Caliper
- Portable hardness tester
- Analog indicator
- Position indicator
- Multi-axis tilt sensor
- Digital force gauge
- Digital micrometer
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.