• Operating Pressure: 350 BAR
• Flow: 200 L/min
• Response Time - Typical: 2 ms
• Internal Leakage: 50 ml/min max at 70 bar
• Temperature Range: -40°C to +120°C (-40°F to +250°F)
• Cavity: T-3A
• Fluids: Mineral-based fluids with viscosities of 7.4 to 420 cSt

• Main stage orifice is protected by a 150-micron stainless steel screen.
• Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
• Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. Consider spool leakage if used in such circuits.

Fast-acting, pilot-operated, balanced piston relief cartridges are normally closed, pressure-limiting valves used to protect hydraulic components from pressure transients. They open and close quickly, sacrificing smoothness. When the pressure at the inlet (port 1) reaches the valve setting, the valve opens to the tank (port 2), throttling flow to limit pressure rise. These valves have low pressure rise versus flow and respond quickly.

Details on installation dimensions and torque specifications are provided, including maximum torque values for different hex sizes.

• Seal-Kits: Options include Buna N and Viton.
• Body Material: Options include 6061-T6 aluminum (rated at 207 Bar) and steel (rated at 350 Bar).
• Body Porting: Options include SAE 8T, SAE 12T, NPT1/2, G1/2, with other porting available.
• Pressure Range: Various ranges from 25 psi to 6000 psi with preset values.
• Adjustment: Options include screw adjust and handwheel adjust.

• Transmission, engine, and powertrain control
• Building and road construction equipment
• Agricultural and garden machinery
• Forestry and resource management equipment
• Waste disposal equipment
• Other professional mobile and industrial applications