HOLID pneumatic vibrator,pneumatic air turbine vibrator,Turbine Vibrator,Industrial Vibrator,GT4 GT8 GT10 GT16 GT20 GT30 GT40
1Pages

{{requestButtons}}

Catalog excerpts

HOLID pneumatic vibrator,pneumatic air turbine vibrator,Turbine Vibrator,Industrial Vibrator,GT4 GT8 GT10 GT16 GT20 GT30 GT40 - 1

Pneumatic turbine vibrators 2.igJSiSft, ilStil 3-4.©SS®mIE**§ 5-7.?L5X}l«e.*® s.enAD 9.fltn?L 10.®®SS?L 11.fc*H5H5tEE*#,B«l* 5I&II 12. S«E«a 13. ssstia Rifi-en ®©iSg120’C=250°F PS 1160-75^51 • No Lubrication only clean air is required Maximum temperature 120"C=250°F Extremely Silent Noise level range 60 to 75 dBA • 1 Extrud ed alu minium alloy body 2 Alu-Turbine wheel, hard coated 3-4 High density mass positive moment 5-7 Cavities giving negative moment 8 Air inlet 9Airexhaust 10 Base mounting holes 11 Special prelubricated matched shielded bearings Alu-Endplates, hard coated 12 with left-hand thread 13 with right-hand thread «£&Seijisi A high speed range and eccentric working moments are combined in these Vibrators to produce a powerful vibration. The body is made from an extruded stove enamelled aluminum section and the hard coated end plates enables the Vibrators to be used in the food and pharmaceutical industries. The GT-Turbine Vibrators conform to current international noise regulations under factory test conditions. The vibration is produced by the centrifugal force of the positive and negative unbalanced moments in the rotor. The rotor is supported on two heavy duty, pre lubricated, matched shielded ball bearings. A special long life grease ensures a long working life. The inner and outer raceways of the bearings are designed so that the bearings can be easily replaced using only a pin-wrench. The end plates are fitted with right-and left-hand threads and are self-locking.

Open the catalog to page 1

All WENZHOU HOLID Automation Equipment CO. catalogs and technical brochures

  1. serie filter

    1 Pages

  2. 3

    1 Pages