Print Mark Reader Technical Data Optical Data Working Range Working Distance Switching Hysteresis Light Source Wavelength Service Life (T = +25 °C) Max. Ambient Light Light Spot Diameter Electrical Data White Light Supply Voltage Switching Frequency Current Consumption (Ub = 24 V) Response Time On-/Off-Delay Temperature Drift Temperature Range Number of Switching Outputs Switching Output Voltage Drop Switching Output/Switching Current Short Circuit Protection Digital read-out of gray-scale values via the RS-232 interface Teach-in, dynamic teach-in, external teach-in, RS232 interface Very high contrast resolution Very small light spot: 1,4 × 4 mm Reverse Polarity Protection Lockable Teach Mode Interface Baud Rate Number of Digital Inputs Protection Class Mechanical Data Setting Method Housing Material Connection Safety-relevant Data NPN NO/NC antivalent RS-232 Interface These sensors have been specially designed to recognize print marks. They have a very small spot and use a white light LED with long service life. Only one sensor is required for the recognition of all color combinations, as well as the difference in brightness between print marks and the background. Connection Diagram No. Control Panel No. Suitable Connection Equipment No. Suitable Mounting Technology No. Complementary Products Fieldbus Gateway ZAGxxxN01, EPGG001 Interface Cable S232W3 Set Protective Housing ZSP-NN-02 Software Photoelectronic Sensors

01 = Switching Status Indicator 07 = Selector Switch 24 = Plus Button 25 = Minus Button 1 = optical axle Screw M4 = 0,5 Nm All dimensions in mm (1 mm = 0.03937 Inch) 357 a = Working Distance b = Working Range Specifications are subject to change without notice Ideal Working Distance