Reflex Sensor with Background Suppression Technical Data Optical Data Range Switching Hysteresis Adjustable Range Light Source Wavelength Laser Class (EN 60825-1) Max. Ambient Light Light Spot Diameter Electrical Data Supply Voltage Supply Voltage with IO-Link Switching Frequency Switching Frequency (interference-free mode) Response Time Response time (interference-free mode) Temperature Drift Temperature Range Switching Output Voltage Drop Switching Output/Switching Current Condition monitoring Detect extremely small parts starting at 0.1 mm IO-Link 1.1 Laser class 1 Residual Current Switching Output Short Circuit and Overload Protection Reverse Polarity Protection Lockable Interface Protection Class Mechanical Data Setting Method Housing Material The reflex sensor with background suppression works with laser light according to the angle measurement principle and is designed to detect objects against any background. The sensor always has the same switching distance, regardless of the color, shape and surface of the objects. The fine laser beam means that even the smallest parts, starting at 0.1 mm in size, can be reliably detected. The IO-Link interface can be used to configure the reflex sensors (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and distance values. Optic Cover Safety-relevant Data Connection Diagram No. Control Panel No. Suitable Connection Equipment No. Suitable Mounting Technology No. Complementary Products IO-Link Master Software Photoelectronic Sensors

05 = Switching Distance Adjuster 30 = Switching Status/Contamination Warning 68 = Supply Voltage Indicator 1 = Transmitter Diode 2 = Receiver Diode Screw M3 = 0,5 Nm All dimensions in mm (1 mm = 0.03937 Inch) 216 Detection Range Light Spot Diameter Switching Distance Deviation Typical characteristic curve based on white, 90 % remission Sr/mm Sr = Switching Distance dSr = Switching Distance Change Specifications are subject to change without notice