FFAT046

FFAT046

FFAT046

Product catalog summary
Overview: The UniTemp temperature sensors are designed for monitoring the temperature of liquid or gaseous media, with a focus on process temperature monitoring.
Technical Specifications:
  • Temperature Measurement Range: 0 to 140 °C
  • Adjustable Range: 2 to 139 °C
  • Medium: Suitable for liquids and gases
  • Measuring Error: ± 1 °C
  • Resolution: 1 °C
  • Switching Hysteresis: 2 °C
  • Response Time: 2 to 4 seconds
Environmental and Mechanical Conditions:
  • Temperature of Medium: 0 to 140 °C
  • Ambient Temperature: -20 to 80 °C
  • Mechanical Strength: 60 bar
  • EMC Compliance: DIN EN 61326-2-3
  • Shock Resistance: 30 g / 11 ms (DIN IEC 68-2-27)
  • Vibration Resistance: 20 g (10 to 2000 Hz, DIN IEC 60068-2-6)
Electrical Data:
  • Supply Voltage: 16 to 32 V DC
  • Current Consumption: 60 mA at 24 V
  • Switching Outputs: 2, with a current of less than 250 mA
  • Voltage Drop: Less than 2 V
  • Protection: Short circuit and reverse polarity protection, Protection Class III
Material and Construction:
  • Housing Material: PBT, PC, FKM
  • Control Panel Material: Polyester
  • Material in Contact with Media: 1.4435, 1.4404, FKM
  • Degree of Protection: IP67
  • Connection: M12 × 1, 4-pin
  • Process Connection: G 1/2" CIP-capable
  • Process Connection Length: 98 mm
  • Probe Length: 60 mm
Safety and Operational Features:
  • MTTFd: 1341.35 years (EN ISO 13849-1)
  • Switch Type: PNP NO/NC switchable
  • Control Panel: Includes switching status indicator, enter button, UP button, display, and right button
  • Additional Features: Highly visible output indicator, simple operation via display, temperature range up to 200°C available
Connection and Interface Details:
  • Various wire colors and functions are specified according to DIN IEC 757, including supply voltage, switching outputs, and interface paths.
Note: Specifications are subject to change without notice.
See more

Catalog excerpts

FFAT046-1

Temperature Sensor Technical Data Sensor-specific data Temperature Measurement Range Liquids, gases Adjustable Range Measuring error Resolution Switching Hysteresis Response Time Environmental conditions Mechanical Strength Electrical Data Supply Voltage Switching Outputs Current Consumption (Ub = 24 V) Switching Output/Switching Current Switching Output Voltage Drop Short Circuit Protection Highly visible output indicator Simple operation via the display Temperature range: 0...200°C available Reverse Polarity Protection Protection Class Mechanical Data Setting Method Material Control Panel Housing Material Material in contact with media Degree of Protection Connection Process Connection Process Connection Length (PCL) Probe Length (PL) Safety-relevant Data PNP NO/NC switchable Connection Diagram No. Control Panel No. Suitable Connection Technology No. Suitable Mounting Technology No. UniTemp temperature sensors measure the temperature of liquid or gaseous media and facilitate the temperature monitoring of processes. Fluid Sensors

 Open the catalog to page 1
FFAT046-2

01 = Switching Status Indicator 20 = Enter Button 22 = UP Button 60 = Display 99 = Right button Legend Supply Voltage + Supply Voltage 0 V Supply Voltage (AC Voltage) Switching Output Switching Output Contamination/Error Output Contamination/Error Output Input (analog or digital) Teach Input Time Delay (activation) Shielding Interface Receive Path Interface Send Path Ready Ground Clock Output/Input programmable Power over Ethernet Safety Input Safety Output Signal Output Ethernet Gigabit bidirect. data line (A-D) Encoder 0-pulse 0-0 (TTL) Platinum measuring resistor not connected Test Input Test...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.