High-Performance Distance Sensor Technical Data Optical Data Range Switching Hysteresis Adjustable Range Light Source Wavelength Laser Class (EN 60825-1) Max. Ambient Light Light Spot Diameter Electrical Data Supply Voltage Switching Frequency Current Consumption (Ub = 24 V) Response Time On-/Off-Delay (RS-232) Temperature Drift Temperature Range Number of Switching Outputs Switching Output Voltage Drop Switching Output/Switching Current Short Circuit Protection CMOS line array Highly accurate switching distance Minimal switching hysteresis Switching point independent of material, color and brightness Reverse Polarity Protection Teach Mode Baud Rate Protection Class Mechanical Data Setting Method Housing Material Connection Error Output Configurable as PNP/NPN/Push-Pull Switchable to NC/NO These sensors work with a high-resolution CMOS line and DSP technology and determine distance using angular measurement. As a result, material, color and brightness related switching point differences are virtually eliminated. Two independent switching outputs are available, at which two switching thresholds and one on or off-delay time (in 10 ms steps) can be configured. Sensor functions can be activated, and scanning results can be acquired via the RS-232 interface. Connection Diagram No. Control Panel No. Suitable Connection Equipment No. Suitable Mounting Technology No. Complementary Products Interface Cable S232W3 Set Protective Housing ZSP-NN-02 Software Photoelectronic Sensors

wenglor the innovative family 01 = Switching Status Indicator 03 = Error Indicator 07 = Selector Switch 24 = Plus Button 25 = Minus Button 1 = Transmitter Diode 2 = Receiver Diode Screw M4 = 0,5 Nm All dimensions in mm (1 mm = 0.03937 Inch) Table 1 Detection Range 40 mm 240 mm Specifications are subject to change without notice