*mydirectindustry

UB2

UB2

Product catalog summary

Technical Bulletin Overview: This document provides an update on the UB2 Shot Pin Cylinder, focusing on the transition from legacy extrusion cylinders to new tube and tie rod cylinders.

Legacy Extrusion Cylinder:

Extend/retract ports are located on the rear end cap.
Switch sensors are mounted in extrusion slots.

New Tube & Tie Rod Cylinder:

The extend port is located on the rear end cap, while the retract port is on the front end cap.
Switch sensors are mounted to tie rods using a bracket.

Dimensional Consistency: The tie rod cylinder maintains the same dimensions as the extrusion cylinder, ensuring compatibility.

Switch Options:

The world switch option remains unaffected by the cylinder update.
A solid-state cylinder switch option is available.

Catalog excerpts

TECHNICAL BULLETIN ENGINEERED PRODUCTS UB2 SHOT PIN CYLINDER UPDATE NPT OR G PORTS EXTEND PORT IS LOCATED ON REAR END CAP RETRACT PORT IS ON FRONT END CAP SWITCH SENSORS MOUNTED TO TIE RODS WITH BRACKET TIE ROD MOUNTED CYLINDER SWITCH SOLID STATE CYLINDER SWITCH OPTION TIE ROD CYLINDER IS DIMENSIONALLY THE SAME AS EXTRUSION CYLINDER: (WORLD SWITCH OPTION IS UNAFFECTED BY CYLINDER UPDATE) WORLD SWITCH OPTION LEGACY EXTRUSION CYLINDER: • EXTEND/RETRACT PORTS LOCATED ON REAR END CAP SWITCH SENSORS MOUNTED IN EXTRUSION SLOTS NPT OR G PORTS SLOT MOUNTED CYLINDER SWITCH Welker Engineered Products 1401 Piedmont Troy, MI 48083 (248) 528-2020 www.welkerproducts.com SHEET 1

Open the catalog to page 1

UB2

UB2

Catalog excerpts

All Welker Engineered Products catalogs and technical brochures