ENGINEERED PRODUCTS BP2 LOCKOUT PIN SOLID STATE CYLINDER SWITCH ALL RAMS ARE HARDENED 4140 Rc 45 MIN. CONICAL NOSE OPTION SHOWN FOR LOCKOUT AND LOCATIONAL APPLICATIONS FLAT NOSE OPTION SHOWN FOR LOCKOUT APPLICATIONS LOCKOUT APPLICATIONS PNEUMATIC, DOUBLE ACTING RETRACTABLE PIN OPTIONAL SPRING EXTEND (AIR LOSS TRIGGERS MECHANICAL SPRING EXTENSION) TRUNNION FIXTURES TURN-OVER UNITS PNEUMATIC 50MM BORE INTEGRATED CYLINDER LIFTERS & SLIDES 2500 LBF LOCKOUT LOAD CAPACITY SAFETY COMPLIANCE LOCKOUT RECEIVERS ORDERED SEPARATELY CLEARANCE HOLE Welker Engineered Products

ORDERING INFORMATION NOTE: ALL BOXES MUST BE FILLED IN FOR A COMPLETE PART NUMBER Stroke 025 25mm Stroke 050 50mm Stroke Cylinder 01 Welker 50mm Bore w/ NPT ports 02 Welker 50mm Bore w/ G ports Pin Nose 1 Conical 2 Flat Spring Extend 0 No spring E Spring Extend Switch 00 No switch LX See Welker Cylinder Switch Chart Bearing S Standard H Maintenance free, PTFE composite lined SPRING EXTEND OPTION "E": SPRING FORCE STROKE ACTUATOR 01/02 25mm STROKE EXTENDED 30 LBF 50mm STROKE EXTENDED 20 LBF FULLY RETRACTED 40 LBF Cylinder Switches SWITCH L3* L3 sw itch is w eld f ield immune, c omparable to World...

GENERAL DIMENSIONS 1/8" NPT OR G1/8 PORTS 50 4X M10x1.5 TAP THRU EVENLY SPACED ON A n70.00 B.C. (CLEARANCE FOR M8 SCREWS FROM FARSIDE) FLAT PIN RETRACTED POSITION OPTIONAL SOLID STATE CYLINDER SWITCH CONICAL PIN RETRACTED POSITION NOTES: -ALL RAMS ARE HARDENED 4140 Rc 45 MIN. -CYLINDERS INCLUDE MAGNETIC PISTON -OPTIONAL SPRING EXTEND (AIR LOSS TRIGGERS MECHANICAL SPRING EXTENSION) SHEET 3 ENGINEERED PRODUCTS 248-528-2020 www.welkerproducts.com

BP2 RECEIVERS ORDERED SEPARATELY BP2NE90 LOCKOUT PIN RECEIVER (2-WAY) CONICAL PIN NOSE OPTION "1" CARB & HARDENED Rc 45-50 2-WAY RECEIVER - FOR USE WITH CONICAL NOSE PIN AS LOCATOR 25 RETRACTED 24.25 MAX. WITH UNIT SHOWN (49.25 MAX FOR 50mm STROKE OPTION) FROM FARSIDE BP2NE91 LOCKOUT PIN RECEIVER (4-WAY) CONICAL PIN NOSE OPTION "1" CARB & HARDENED Rc 45-50 4-WAY RECEIVER - FOR MORE ACCURATE LOCATING, USE WITH CONICAL NOSE PIN AS A FINAL POSITIONER OR SAFETY LOCKOUT 25 5 SAME SET UP CONDITION AS #BP2NE90 SHOWN ABOVE 4X n9 DRILL THRU EVENLY SPACED ON A 60.00° `0.5° CONICAL INCL ANGLE TYP BOTH SIDES...

BP2 CLEARANCE RECEIVERS ORDERED SEPARATELY BP2NE92 LOCKOUT PIN RECEIVER (CLEARANCE) PIN NOSE OPTION "2", 50mm STROKE CLEARANCE HOLE - FOR USE WITH FLAT/CONICAL NOSE PIN AS SAFETY LOCK-OUT FROM FARSIDE BP2NE95 LOCKOUT PIN RECEIVER (CLEARANCE) PIN NOSE OPTION "2", 25mm STROKE CLEARANCE HOLE - FOR USE WITH FLAT/CONICAL NOSE PIN AS SAFETY LOCK-OUT FROM FARSIDE ENGINEERED PRODUCTS SHEET 5