phoenix LARGE CAPACITY CNC ID GRINDER Note: System requires a filtered and dry air source Spindle speed range infinitely variable. Motor, FANUC AC Digital Servo Maximum slide travel Centerline workpiece, height from floor Note: Actual speed and power rating calculated to suit specific application Way construction linear way system with recirculating bearings and Max. travel FANUC AC digital servo drives floor is only requirement. Three-point anti-vibration suspension system requiring no floor attachment. FANUC AC digital servo system RS 232 / Ethernet / Memory card / USB

PHOENIX RISING The Weldon Phoenix is a heavy-duty CNC grinder ideally suited for high-production, heavy part, carbide/ ceramic, and flex-production applications. An optional programmable “C” axis package provides non-round (cam) grinding capability. Designed for the use of Superabrasives, the Phoenix can accommodate both diamond and vitrified CBN grinding wheels. The Phoenix can also be arranged in a dual spindle configuration for multiple-feature grinding (bores, outside diameters, faces, etc.) in a single set-up. TYPICAL APPLICATIONS: Transmission gears, pump cam rings, wear plates, large bushings,...

Shear Damper machine base FEATURES: OPTIONAL • 22” swing capacity to accommodate larger workparts. • Programmable gear drive workhead with rotary scale, 475 RPM max. For non-round cam applications. • OD grinding spindle, straight or angular, with variable speed drive. • Multiple grinding spindle configurations providing the opportunity for mounting (2) ID grinding spindles, or (1) ID spindle and (1) OD spindle to perform multiple grinds in a single set-up. • X and Z axis linear motors for highspeed or non-round cam applications. • Electric rotary dressing systems for superabrasive wheels or extended...

PHOENIX SPECIFICATIONS CAPACITY ELECTRICAL SPECIFICATIONS Wired in accordance with IEC standards, 480 VAC, 3-phase, 60 Hertz (AC) PNUEMATICS (air moisture: 70° F. dew point maximum) Note: Actual speed and power rating calculated to suit specific application TABLE DRIVES Note: System requires a filtered and dry air source CNC CONTROL SPECIFICATIONS - Fanuc 32i-BT • Inch / metric programming • Manual pulse generator • Full linear and circular contouring and positioning capabilities • FANUC AC digital servo system • Direct rpm programming or constant surface speed • Built-in diagnostics • 10.4” high-resolution...