Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Weldon Solutions
  3. AGN4 SMALL PART OD GRINDER

AGN4 SMALL PART OD GRINDER

AGN4 SMALL PART OD GRINDER
1 / 4 PagesView full catalog

AGN4 SMALL PART OD GRINDER

Product catalog summary
Specifications:
The AGN4 is a compact CNC cylindrical grinder designed for high precision small parts. It features a maximum work swing of 7.08 inches and a maximum distance between centers of 9.84 inches. The workhead motor is 1 HP with variable speeds from 0 to 1400 RPM. The wheelhead motor is 5 HP with a nominal speed of 8,500 SFPM and a travel distance of 6.7 inches. The grinding wheel has a maximum diameter of 14 inches and a width of 1.97 inches. The tailstock has a #2 Morse taper with pneumatic quill travel of 1.2 inches.

Table Drives:
Equipped with Fanuc AC digital servo drives, the table has a travel distance of 14 inches and a rapid-traverse rate of 640 inches per minute. The programmable feed rate ranges from 0.000010 to 200 inches per minute.

Lubrication and Pneumatics:
The machine uses recirculating hydraulic oil for wheel spindle lubrication and automatic lube oil for ways and ballscrews. It requires an air pressure of 80 PSI and an air volume of 5 SCFM.

Electrical Specifications:
Standard voltage is 208 VAC, 3-phase, 60 Hertz. Other voltages require factory consultation.

Machine Dimensions:
The machine measures 58 inches in width, 79 inches in depth, and 74 inches in height, with a weight of 4,600 lbs. It is constructed from cast iron and requires a 6-inch concrete floor foundation.

CNC Control Specifications:
The Fanuc 0i-TD control includes a manual pulse generator, full contouring capabilities, and a color LCD display. It supports EIA or ISO coding and has a memory card/USB interface.

Applications:
The AGN4 is suitable for high precision grinding of small parts, capable of handling various part configurations with minimal setup. It can grind outside diameters, shoulders, and faces in a single setup.

Standard Features:
Includes a Fanuc Series 0i-TD CNC control, cast iron machine base, pressurized Vee & Flat way system, and a 5 HP AC wheel drive. It also features a combination live and dead spindle workhead and a pneumatic tailstock.

Optional Features:
Options include programmable workhead, in-process or post-process gaging, automatic wheel balancer, and various workholding solutions. Automation options include gantry systems and Fanuc 6 Axis robots.
See more

Catalog excerpts

AGN4 SMALL PART OD GRINDER-1

AGN4 SMALL PART OD GRINDER

 Open the catalog to page 1
AGN4 SMALL PART OD GRINDER-2

ELECTRICAL SPECIFICATIONS CNC CONTROL SPECIFICATIONS - Fanuc 0i-TD • Manual pulse generator • Full linear and circular contouring and positioning capabilities • Fanuc digital and AC servo system • Direct rpm programming or constant surface feet • Built-in diagnostics • 8.4” LCD display, color • Automatic recognition of EIA or ISO coding • Decimal point programming • RS 232 / Ethernet • Memory card / USB Interface • .000010” command resolution • Automatic update of offsets • Program storage, 1280m 425 East Berlin Road | York, PA 17408 | T: 717.846.4000 | F:

 Open the catalog to page 2
AGN4 SMALL PART OD GRINDER-3

APPLICATIONS The Weldon model AGN4 is a compact CNC cylindrical grinder designed specically to produce high precision small parts either between centers or in a chucking mode. Although capable of running in a high production environment, the AGN4 also provides the exibility to grind a wide variety of part congurations with minimal set-up. Available with either a straight or angular wheelhead (factory set) the AGN4 can grind outside diameters, shoulders, and faces in a single set-up. The CNC control can address complex form grinding (tapers, radii, etc.) via form dressed wheels or proling. STANDARD...

 Open the catalog to page 3
AGN4 SMALL PART OD GRINDER-4

OPTIONAL FEATURES • Programmable wokhead with rotary scale for non-round applications. • In-process or post-process gaging for automatic size control. • Automatic lateral locator, wheelhead mounted, featuring a Renishaw probe. • Automatic wheel balancer, pulley side mounting. • Electric rotary dressing systems for superabrasive wheels or extended diamond life when processing with standard abrasives. • Acoustic emissions sensor for gap elimination, crash detection, and touch dressing. • Workholding solutions can be addressed with a variety of systems such as manual and powered jaw chucks, collet...

 Open the catalog to page 4

All Weldon Solutions catalogs and technical brochures

  1. 1632 GOLD OD/ID/C-Axis Carbide Die Grinder
    1632 GOLD OD/ID/C-Axis Carbide Die Grinder

    1  Page

  2. 1632 “2 in 1” Input Shaft Grinder
    1632 “2 in 1” Input Shaft Grinder

    1  Page

  3. 1632 GOLD OD / ID CNC Grinder
    1632 GOLD OD / ID CNC Grinder

    1  Page

  4. AGN4 OD Tool Room Grinder
    AGN4 OD Tool Room Grinder

    1  Page

  5. Automated AGN4 Face Grinder
    Automated AGN4 Face Grinder

    1  Page

  6. Midas 320S Bearing Grinder
    Midas 320S Bearing Grinder

    1  Page

  7. Midas 320A Dual Spindle SiC Grinder
    Midas 320A Dual Spindle SiC Grinder

    1  Page

  8. Midas S2 Axle Shaft OD Grinder
    Midas S2 Axle Shaft OD Grinder

    1  Page

  9. Midas 320A Dual Spindle SiC OD/Flat/Face Grinder
    Midas 320A Dual Spindle SiC OD/Flat/Face Grinder

    1  Page

  10. UGC SMALL CAPACITY ID GRINDER
    UGC SMALL CAPACITY ID GRINDER

    4  Pages

  11. phoenix LARGE CAPACITY CNC ID GRINDER
    phoenix LARGE CAPACITY CNC ID GRINDER

    4  Pages

  12. G300 CNC CYLINDRICAL OD GRINDER
    G300 CNC CYLINDRICAL OD GRINDER

    4  Pages

  13. BAKERY AUTOMATION
    BAKERY AUTOMATION

    4  Pages

  14. ALTAIRA
    ALTAIRA

    4  Pages

  15. SOLARIS
    SOLARIS

    4  Pages

  16. midas
    midas

    4  Pages

  17. GOLD
    GOLD

    4  Pages

  18. G300
    G300

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.