Model PA-10/100-STD Micro Arc
3Pages

WELDLOGIC FDRMING & WELDING SOLUTIONS WELDING SOLUTIONS FOR ADVANCED MANUFACTURING PA-10 100-STD Micro Arc The Most Accurate Low-Current Welding System on the market today The precision weld fabrication of delicate heat sensitive assemblies is now a practical reality. Finally, there is an alternative to complicated and costly beam welding systems. Very low heat, highspeed welds can now be made in materials as thin 0.001” and as thick as 0.125” with the Weldlogic PA-10/100-STD, which meets and exceeds the throughput and repeatability demands of high volume TIG and Plasma manufacturing requirements. Now CE marked to comply with the highest safety and RF emissions standards. This unique state-of-the-art dual range, 10 amp/100 amp, precision pulsed current arc welding system is the result of years of research and development in low current arc starting and control stability. Weldlogic’s exclusive Direct Current (DC) arc initiation prevents start pulse overmelts in the most delicate of welds, and extends tungsten life. Closed loop servo control of welding current and direct reading digital controls make the PA-10/100-STD the most accurate low current welding system on the market today. Millisecond square wave arc current pulsation produces a narrow, more efficient arc for high consistency of low heat welds. Weldlogic, Inc. maintains a staff of experts in the specialty of precision welding and automation for a wide variety of manufacturing industries. Features: • 110V, or 220V - 50/60 Hz, Single Phase Operation • Ultra-low current system can soft- start and weld at 0.1 ampere • DC Arc Starting extends tungsten life • Dual range from 0.1 ampere to 100 amperes (60 percent duty cycle max) • Welds material thicknesses from 0.00075” to 0.125” • Closed-loop servo current control design • No arc wander, even with current as low as 0.1 amp • Trans-Portable • Panel switchable TIG/Plasma modes • CE Marked • Many standard and custom options available

WELDLOGIC FDRMING & WELDING SOLUTIONS WELDING SOLUTIONS FOR ADVANCED MANUFACTURING Specifications: OUTPUT Current (DCEN) Accuracy: Open circuit volts: Pulsing Freq.: Pulsing Width: INPUT Voltage: Current: Frequency: Phase: Power: ARC START Type Minimum start: Gas: Exclusive DC Arc Start 0.1 amperes Argon, hydrogen, helium or any mixture Control Specifications: TIMING Prepurge: Upslope: Weld: Downslope: Postpurge: Fixture delay: WELD CURRENT CONTROLS Weld current (high range) Weld current (low range) Background current (high range) Background current (low range) PANEL CONTROLS...

WELDLOGIC FDRMING & WELDING SOLUTIONS WELDING SOLUTIONS FOR ADVANCED MANUFACTURING • Main Arc Current: • Power Input: • Arc Voltage: • Open Circuit Voltage: • Pilot Arc Voltage: • Pilot Arc Current: • Pulse Rate: • Upslope / Downslope • Weld Time • Dimensions • Weight (dry) Weldlogic USA Engineering & Mfg. 2651 Lavery Court, Newbury Park CA 91320, USA Tel. (805) 498-4004 I Fax. (805)498-1761 Weldlogic Europe Blackstone Road, Huntingdon Cambridgeshire, PE29 6EF, UK Tel. 01480 437478 I Fax. 01480 437479