Top Features:

• Effective on painted or rust-covered steel.
• Recommended for bridging wide gaps.
• Weldable in all positions with a single current setting.

Classification:

• AWS A5.1 E6012
• EN ISO 2560-A E 38 0 RC 11

Current Type: AC/DC-
Welding Positions: All positions
Approvals: LR, BV, DNV, TÜV, DB
Chemical Composition (Weight %), Typical, All Weld Metal:

• Carbon (C): 0.12%
• Manganese (Mn): 0.5%
• Silicon (Si): 0.6%

Mechanical Properties, Typical, All Weld Metal:

• Condition: As welded (AW)
• Yield Strength: 470 MPa
• Tensile Strength: 550 MPa
• Elongation: 23%
• Impact ISO-V (0°C): 56 J

Output Range:

• 2.5 x 350 mm: 70-90 A
• 3.2 x 350 mm: 95-130 A
• 4.0 x 350 mm: 130-170 A
• 5.0 x 350 mm: 170-250 A

Packaging and Available Sizes:

• 2.5 x 350 mm: 110 electrodes/pack, 2.1 kg, Item number: 588694-1
• 3.2 x 350 mm: 165 electrodes/pack, 4.8 kg, Item number: 588695-1
• 4.0 x 350 mm: 115 electrodes/pack, 4.9 kg, Item number: 588696-1

Test Results:

Test results for mechanical properties, deposit or electrode composition, and diffusible hydrogen levels were obtained from a weld produced and tested according to prescribed standards. Actual results may vary based on factors such as weld procedure, plate chemistry, and temperature. Users should confirm suitability through qualification testing or other appropriate means before use.

Safety Data Sheets (SDS) are available online. Information is subject to change; refer to the website for updates.